Openbox FW, little guidance needed

[dekd1]

Howdy,

Could someone with a little more knowhow than me help clear up some confusion on my part please.
I've searched this plenty before deciding I'm none the wiser -

What Openbox FW is interchangeable with other units - i.e S9 works with S10, S11 or S10 works S10/11 but not S9 etc.

I'm trying to shift a motor with a S11 unit and it reboots when stepping east/west. Motor is def fine.
To get around this, I'm going to try FW, but I'm genuinely a little unsure as to what one to go for on this S11. I did see some motor fix mention for S10 firmware in a changelog. so wonder if this is the way forward?

Either way, is someone could help with the most recent suitable FW for the S11 I would be most grateful > Or if they can get around the reboot when moving the motor

Thanks in advance.

D

[kendrs]

Im using 10-10-11 and the S11 will drive my dish but not via USALS just Diseq 1.2.

[dekd1]

re:

TY !!
Will give it a whirl... using old clone 500 to drive at the mo but I'd sooner ditch it....

[slugworth]

backup

I would backup firmware before trying new,just in case.