Hi All - Please please help!
I have an Openbox S11 setup with the Firmware "C2HS2-12-02-02:0481CMT unofficial" by AnonymousX. I can receive FTA channels but it is displaying "scrambled" for pay channels which the original card unscrambles in my sKy+ box. The same occurred with the original firmware the box came with and so I installed the new firmware.
I have looked through various threads on all sites and have entered the correct 8 character Boxid key which I calculated using the correct 10 characters from the NDS code on the sky reciever.
Details:
Firmware -
In the CA set up pages I have the following information if it helps:
CA System: Videoguard
CAID: 0963
Serial: 03363*** (where * is alphanumeric character)
Issuer: Videoguard Unknown
Provider ID: 0000000
CA Slot Clock Setting = 6.12Mhz
EMM Allow = Enabled.
Your assitance would be most grateful.
Many Thanks!
I have an Openbox S11 setup with the Firmware "C2HS2-12-02-02:0481CMT unofficial" by AnonymousX. I can receive FTA channels but it is displaying "scrambled" for pay channels which the original card unscrambles in my sKy+ box. The same occurred with the original firmware the box came with and so I installed the new firmware.
I have looked through various threads on all sites and have entered the correct 8 character Boxid key which I calculated using the correct 10 characters from the NDS code on the sky reciever.
Details:
Firmware -
In the CA set up pages I have the following information if it helps:
CA System: Videoguard
CAID: 0963
Serial: 03363*** (where * is alphanumeric character)
Issuer: Videoguard Unknown
Provider ID: 0000000
CA Slot Clock Setting = 6.12Mhz
EMM Allow = Enabled.
Your assitance would be most grateful.
Many Thanks!