It's driving me insane. There's seemingly lots of people with the issue described above but none of my boxes and nobody I know can recreate the problem!? It works fine here. Most people with the issue seem to have to v8s, so I was wondering if it's a firmware issue but it's still working fine with all the different firmware I've tested, and I can't get anyone with a problem box to send me their backed up image!
-
Last edited by DeejayAJ; 27 November, 2015, 23:05. -
Aj-
I have emailed you backup image from v6s (same firmware as v8s)
from a quick look there is adult category in the faves even tho i downloaded no adult
within this category only one channel shows up.. its name escapes me. but i emailed u the detailsComment
-
Is the 27-11-15 update being added on here as the one from AJ site never works for me just goes straight to 100% where as the updates here go slow to 10% then shoots to 100%Comment
-
Ahhh right. The problem is, AJ list doesn't have a Scottish favourite category! I take it that you were previously using a channel list from someone else (CWAITE perhaps?).
Not all channel list providers use the same categories for their favourites, so you get problems when you switch from one to another. The way round it is to do a "Factory Settings".
To get the headers to show correctly, you need to reset your box back to Factory settings after you have installed the latest channel list (menu > tools > factory settings). A message will appear to say that it will erase the channels. Select Yes. A pop-up menu will appear with options to erase other files. DO NOT SELECT ANY OF THESE. Press the blue button on remote. Wait a few seconds for the data to be saved.
You should now have the favourites labeled correctly.
Put the box into standby & then back to ON. (You have to do this now before making any of the changes mentioned below, otherwise they will revert back).
Depending on which model of openbox/skybox you have, these menu options may need to be reset...
Check summer time is set correctly.
EPG default setting will be "satellite"
If you have your channel list layout set to "three" it will reset back to "whole" in the M/P > GUI config setting.
Check DHCP is set to ON
Check Local time setting is still on UK
Subtitles will be set to ON
Network Local Settings may be hidden on older boxes (press 6666)
camds setup may be hidden in Network Local Settings (press 6666)
Volume will be reset to half way
PIN might have been reset to 0000 (not sure about this, as I never change it).Last edited by Hadron; 28 November, 2015, 13:26.Comment
-
my issue was diff altho on a f3 i had same issue as worthlComment
-
Have you got an internet connection? If so then it is an issue with your provider. No channel list whether it be AJ's or any other for that matter will cause scrambling.Comment
-
hi mate . just try another list, if that isnt working the problem could lie elsewhere, if you are getting freeview ones,Check DHCP is set to ON is a common one , you dont open the tp file that you downloaded,channel aj list doesn't need to be opened it just goes straight onto the usb, from winrar or whatever, sorry if you know this just going through a few bits to try and help.
ps you havnt ticked to add anything else as this will alter those settingsLast edited by wortho; 28 November, 2015, 15:36.Comment
-
Hi guys!!!
You prob read this over and over but what channel number is the fight on 2nite plz?Comment
-
information given is to be used for educational purposes only
Don't Forget To Say Thanks If You Like My Post
IF YOU THINK A POST HAS BEEN USEFUL USE THE THANKS BUTTON
If It Ain't Broke Don't Fix ItComment
-
bt sports extra channels are not named correctly in the sports section on my v6s. using latest aj listComment
Comment