openbox Your Own Personal Boot Image

[mohailem]

How to Install a Back Logo:
To install it simply click Menu -> Tools -> Upgrade by USB -> set Upgrade Mode to Misc Files
Now click on Select & Upgrade highlight option 2 Back_Logo m2v and click OK, once you see the check mark or tick click the Yellow button to install.

[slugworth]

back logo is a background logo,not a boot image which is only seen at bootup.2 different logos.

[mohailem]

back logo is a background logo,not a boot image which is only seen at bootup.2 different logos.

thanks .i know what u mean but you can use the same converted [m2v] picture as boot_logo or back_logo

[tonynw]

thanks .i know what u mean but you can use the same converted [m2v] picture as boot_logo or back_logo

No option for boot logo ???

tonynw

[mohailem]

No option for boot logo ???

tonynw

I'll TRY TO EXPLAIN
#VERY IMPORTANT : BACKUP[DUMP] YOUR data such [tp_prog,cccam.cfg,piro,newcamd or softcam,etc..]and IMAGE .ABS to usb.
#open Openbox_s9-s10_Toolbox [download from attachment]
#open s9 s10 firmware tool 0.3
#open firmware [from usb or pc]
#lmport boot_logo [m2v]
#confirm change
#saved be automatic to same folder
#change named from [HDS2_DUMP.abs.2012-04-21_14-21-50.bak] TO [HDS2_DUMP.abs]
#UPGRADE YOUR BOX
#DONE

[slugworth]

actually there is a radioback logo also,for the few people that use the s10 for radio listening.
firmware tool is up to v0.5,I would use that instead.

batchdvdstreamsconverter
free and it has everything you need for making .m2v
Remember to use pictures bigger than 720x576 or women's butts end up looking bigger than my house.(unless you are into that)
Batch DVD Streams Converter 1.0 - VideoHelp.com Downloads

720x576 for pal mode and
720x480 for ntsc mode
for those playing along at home.

I believe the lan manager has the replace back logo option also.

[mygsm]

Dear all,
I'm newbie in openbox. i own a Measat 91.5E sever. i wish to change my own boot image. I'll try to follow the instruction. Thanks alot.

I'll TRY TO EXPLAIN
#VERY IMPORTANT : BACKUP[DUMP] YOUR data such [tp_prog,cccam.cfg,piro,newcamd or softcam,etc..]and IMAGE .ABS to usb.
#open Openbox_s9-s10_Toolbox [download from attachment]
#open s9 s10 firmware tool 0.3
#open firmware [from usb or pc]
#lmport boot_logo [m2v]
#confirm change
#saved be automatic to same folder
#change named from [HDS2_DUMP.abs.2012-04-21_14-21-50.bak] TO [HDS2_DUMP.abs]
#UPGRADE YOUR BOX
#DONE

[epik]

thanks for this guide

[squig007]

does the s9/s10 toolbox work with an s12 ?

[belonengat]

Can i do my self for boot logo?

[slugworth]

Can i do myself for boot logo?

only if you are good looking

[Mujy786]

am good looking

[fyzue]

thanks for this guide

[magganas]

thanks for the guide

[asmdaza]

how about cccam and newcamd? help please