i just got openbox x3 says in manual ccam and mgcamd config but no in the menu on box do i have to manually but the mgcamd files on by usb then will it show? thanx
-
-
I think you have to activate to see?.
Try menu, network, press 6666 and you should get to ?.
Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!
Did you know People will question all the good things they hear about you but believe all the bad without a second thought.
Note:All information given is to be used for educational purposes only and should not be taken seriously. -
just done 1 in the past hour and can confirm the above method work'sComment
-
thanx i ad to flash it to see it 6666 didnt workComment
-
Worked for me. Thanks.
Note to others... you don't actually go into the network options before pressing 6666 - this is what I did initially, and it didn't work. Just hit the menu button to get into the menu options, then press the down arrow until you get to the network options. Once at the network options press 6666. You can hide the options again by repeating the above.Comment
Comment