No signal through hd cable

[WOLVES09]

Afternoon all, just wondering if anybody could help? I've got a S9 which has been working like a dream until my router packed up, after replacing my router I powered the box back up, it booted up fine on the front of box but there was no signal coming through to the tv! I've changed the hdmi lead but still nothing, the only time there's a picture is when I plug a scart lead in the back, once removed and hdmi put back in there's no signal again! Any ideas would be appreciated greatly and probably stop me having headaches

[cactikid]

do you have to change settings on box or tv?

[andy91]

Afternoon all, just wondering if anybody could help? I've got a S9 which has been working like a dream until my router packed up, after replacing my router I powered the box back up, it booted up fine on the front of box but there was no signal coming through to the tv! I've changed the hdmi lead but still nothing, the only time there's a picture is when I plug a scart lead in the back, once removed and hdmi put back in there's no signal again! Any ideas would be appreciated greatly and probably stop me having headaches

Are you talking about premium channels?
Chances are you need to setup the network again with the new router.

Andy.

[WOLVES09]

All channels, there's no settings on the tv and I've got all the same settings on the box as before! Could it be a firmware problem, just seams strange that it's only just happened when my router went down!! Every channel is coming through the scart fine

[andy91]

All channels, there's no settings on the tv and I've got all the same settings on the box as before! Could it be a firmware problem, just seams strange that it's only just happened when my router went down!! Every channel is coming through the scart fine

Have you changed to a different brand of router ie Netgear,Belkin?

Andy,

[cactikid]

if scart is working ok,have you retried another hdmi.

[WOLVES09]

Same router as in netgear! Tried different hdmi slots on tele even tried another tele

[andy91]

Same router as in netgear! Tried different hdmi slots on tele even tried another tele

I mentioned that just incase you swapped brands of router and you would need a different ip on the box to match the router.

Andy.

[nibblitz]

Has the hdmi Video output setting on the S9 gone to a setting that your TV doesnt support?

[darcu5]

could of caught the v-format button on the remote and changed it to wrong format as niblitz says above, if you press v-format once on remote and wait around ten seconds see if owt comes on tele, keep doing this.. press once wait over 10 seconds, theres a few v format settings but patience is a virtue

[WOLVES09]

Ok cheers I'll give it a try! Box has been on there for 6 months or so must be something daft that's changed somehow

[eattheliving]

Ok cheers I'll give it a try! Box has been on there for 6 months or so must be something daft that's changed somehow

i had the same issue mate. see post below

http://www.digital-kaos.co.uk/forums/f184/hdmi-feed-279264/

got no replys so took it as s9=bin.

i tried all the above. in the end went back to the trusty tm600( better pic on scart)

[WOLVES09]

Dd you try upgrading the firmware! This is gonna be my last option

[eattheliving]

Dd you try upgrading the firmware! This is gonna be my last option

yep. still didn't work mate and now to cap it all off my sons s10 lan port is playing up. typical