glitching sticking nightmare

[gibbo1471]

Hi I have owned my openbox s10 for about 15 months now its always glitches no matter what c line I have the one I am using is slightly better but it sticks then starts again the sound stays ok does not stick just picture it like breaks up tried everything any ideas the c line seems fine there end please help I have tried in different houses so aint the internet please help

[Frogger]

Hi I have owned my openbox s10 for about 15 months now its always glitches no matter what c line I have the one I am using is slightly better but it sticks then starts again the sound stays ok does not stick just picture it like breaks up tried everything any ideas the c line seems fine there end please help I have tried in different houses so aint the internet please help

What is the clock settings on your CA area on the stb?

3.57 or 6.xx etc? Should be set to 6.xx, then a reboot.

[nibblitz]

If its only the $ channels causing you issue then its almost certainly down to a crappy share... You say it glitches no matter what line you have, but have these lines you've used been freebies & cheapos, then there's your problem....

[Frogger]

If its only the $ channels causing you issue then its almost certainly down to a crappy share... You say it glitches no matter what line you have, but have these lines you've used been freebies & cheapos, then there's your problem....

What if the EMM is set to off? Would the stb get no Ccam or some, some which could cause glitching. I imagine NONE...

When I read "Glitching" I thought we were glitching Roms

[gibbo1471]

How do I change tge time on tge CA then to six thanks

[Frogger]

How do I change tge time on tge CA then to six thanks

Press Menu, Tools -> Ca Slot Setting and press right or left to select a clock setting. I think this is where the boxkey can be entered (which you dont need to do, but for others reading) well once you have converted it to hex.