openbox s10 help

[baz007]

hello everyone,
my openbox started with the rebooting problem after like 8-9 months of use. So i figured it may be a bad channel so i unplugged the satellite feed installed a new channel list and it still reboots on $ channels? weird! what can i do to fix it?
thanks

[baz007]

i decided to update the firmware and now its stuck on ON? i had to use the cable method with eerom upgrade software.Any ideas anyone? i may have to buy another box, any suggestions for the ?50-60 mark?

[mast]

i decided to update the firmware and now its stuck on ON? i had to use the cable method with eerom upgrade software.Any ideas anyone? i may have to buy another box, any suggestions for the ?50-60 mark?

Hi

Have you repaired it.

Regards

[wortho]

i decided to update the firmware and now its stuck on ON? i had to use the cable method with eerom upgrade software.Any ideas anyone? i may have to buy another box, any suggestions for the ?50-60 mark?

get an f3 off amerzon for less than ?50 mate, but before that just try and get a firmware thats ok, im using one from last nov, not had that much bother with it might have to switch power off and on if i have left it overnight or something , no other problems, sorry in work so cant tell you the actual one.

[slugworth]

when you update firmware you have to tick include bootloader.

[baz007]

hello everyone, i will give it a try again and make sure to tick include bootloader. Another problem is the USB don't seem to work now aswell! Any idea how i can transfer a channel list over without using a usb? really appreciate all the help everyone.

[wortho]

hello everyone, i will give it a try again and make sure to tick include bootloader. Another problem is the USB don't seem to work now aswell! Any idea how i can transfer a channel list over without using a usb? really appreciate all the help everyone.

there is factory firmware on here somewere mate ,put that on and start from scratch

[baz007]

Can't seem to find the factory firmware mate, any idea where i can find it?

[wortho]

Can't seem to find the factory firmware mate, any idea where i can find it?

sorry mate in work so blocked off a lot of sites, it was on here a while ago , think its on the manufacters download site as well
this might help matehttp://www.digital-kaos.co.uk/forums/f184/flashing-bricked-openbox-s10-214965/if the link isnt working its in post 208 on latest firmware , at the top forum. hope it helps

[slugworth]

transfer a channel list can be done via rs232 or lan.
Lan would be faster.