Help with ENTV

[Manic01]

you need to move motor west big time.

[bluenose]

Right OK, thats a massive help, I'll see whats happening on the STB and report back in a min, thanks again

[Manic01]

no probs.
If you never had it tuned in before thats the reason as diseqc needs to be manually set for each sat.
If set on usals it would of found itself once set up correctly in first place.

[bluenose]

Thanks Manic, just changed to usals, motor moved big time. But can't find anything on 22 now. Are there any other settings I need to change on Stb?

[Manic01]

You will need to enter long/lat settings in usals to start with.

[bluenose]

I've set that up already when I first got the box, settings are still there in Installation Settings, is it OK to post them here in case theyre wrong?

[Manic01]

yes post them mate.

[bluenose]

No signal now on Astra 28.2, must have a setting wrong somewhere. Checked motor setting in usals lat and long in there

[bluenose]

It's an F3 box btw. Local lat is 002.90W and long is 53.41N. Does that sound right?

[Manic01]

Will be approx 53.5 North 3.0 west

[Manic01]

yes looks correct i posted before i saw your last post sorry.

[Manic01]

Is usals finding other sats ok when you try?

[bluenose]

Lost signal on all sats mate, any ideas, sorry to.be a pain.

[nibblitz]

Ummm, was this dish aligned for Thor 0.8w when it was first installed? Or was is just pointed at 28.2e to start with?

[Manic01]

Usals works if set up initially on usals.