Help with ENTV

**Manic01** · 15 December, 2012, 15:03

diseqc.........

**bluenose** · 15 December, 2012, 15:04

1 min, will try

**bluenose** · 15 December, 2012, 15:07

No channels found but dish looks about 15 - 20 east? Def doesn't look in right place by far

**bluenose** · 15 December, 2012, 15:08

Sorry ignore that, is finding channels now, I'll let u know when finished

**Manic01** · 15 December, 2012, 15:08

What sats have you been able to receive?

**Manic01** · 15 December, 2012, 15:09

You will fill all the channel space up soon if just randomly scanning.

**Manic01** · 15 December, 2012, 15:10

Just stop it when it scans a channel in and psot here the info.

**bluenose** · 15 December, 2012, 15:11

I know, it looks like 4.8 again tv2 film and Charlie 11728h 27500. That's what I scanned in on 30.0w

**Manic01** · 15 December, 2012, 15:16

You need to manually move the motor using motor control until you can get a signal on entv transponder.

**bluenose** · 15 December, 2012, 15:17

Darn, that's a pain. Ok I'll do that but will have to get mate round with ladders. Would that not throw the other sats out though?

**Manic01** · 15 December, 2012, 15:18

No mate, not physically move it, move it using the motor control in menu.

**bluenose** · 15 December, 2012, 15:19

Ah, ok so just to recap. I'm setting up for 22.0w then stepping motor east or west until I lock onto entv?

**Manic01** · 15 December, 2012, 15:21

When you scanned in 22w last time you received 13e.
So move motor stepping west, making sure you can see the entv tp when you are doing it.

**Manic01** · 15 December, 2012, 15:21

It will be a fair old way round west.

**bluenose** · 15 December, 2012, 15:23

Ok, I think I can only step motor on diseqc though, is that correct?

Comment