Can this be used...

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dannat
    Newbie
    • Dec 2012
    • 10

    #1

    Can this be used...

    Hi,

    In my current $ly setup, I have this -

    Antiference 2-way Line Powered Amplifier LPA120D | Satbuyer

    To send the signal to two other rooms in my house, is there anyway it can be used with a Skybox F3?

    Cheers.
    Last edited by PremierD; 29 December, 2012, 19:39.
  • nibblitz
    DK Veteran
    • May 2010
    • 1300

    #2
    No, because Skybox/Openbox receivers dont have RF outputs on them..

    Comment

    • Dannat
      Newbie
      • Dec 2012
      • 10

      #3
      I was hoping I could get some sort of converter to run off the
      comp cables and into my lpa? If not do you know if there is there a box I can use that will use the cable I already have in place?

      Comment

      • DW190
        DK Veteran
        • May 2012
        • 1263

        #4
        Originally posted by Dannat
        I was hoping I could get some sort of converter to run off the
        comp cables and into my lpa? If not do you know if there is there a box I can use that will use the cable I already have in place?
        For what your going to pay for a rf converter you might as well just set up another box

        Comment

        • Dannat
          Newbie
          • Dec 2012
          • 10

          #5
          I would, but it feeds 2 tv's so that's 2 boxes + 2 extra subs. Can you recommend a converter that will do the job?

          Comment

          • nibblitz
            DK Veteran
            • May 2010
            • 1300

            #6
            Triax Tri-Link

            But the RF picture quality will be naff if viewing on large modern LCD tellies...

            Comment

            • Dannat
              Newbie
              • Dec 2012
              • 10

              #7
              Cheers, I will have a look.

              Comment

              • Dannat
                Newbie
                • Dec 2012
                • 10

                #8
                Just had a quick look online, so with the tri-link would I also buy a converter for component cables to scart? And run it that way.

                Comment

                • nibblitz
                  DK Veteran
                  • May 2010
                  • 1300

                  #9
                  Not the Component output, you would use the Composite output from the box, Yellow (video) Red & White (Audio). You would need an RCA PHONO to Scart cable..

                  Comment

                  Working...