SkyBox F5 setup help
Collapse
X
-
Already done that with no avail. Why does the signal change when I change the transponder? The one the channel list select is low but when I change to another its goes back up.Comment
-
That means you are pointing at the wrong dish 19e? you need to align your dish so that it points to 28.2e you can get a meter or use a smart phone app to get you near the position your dish should be. There used to be website which used to show graphically what direction to point the dish but at the moment I can't remember the name.Comment
-
its slightly to the right of the sat you are getting now just move cm at a time to the right untill you get bbc come on. because it might not be bbc it will be a different channel using the same frequency but on a different sat not the one you want no german on 28.2Last edited by sb18180; 13 April, 2013, 15:17.
Comment
-
no you have the list for 28.2 so it will come on auto when dish is alligned just take it steady bit at a time its a good signal so easy to find. dont know for sure what sat you are pointing at but its not the one you want so try both directions till you get it
Comment
-
If you are on 28.2e then as you change channels bbc,bbc2,itv1,etc.. all channels should be clear.
When I aligned my dish I used the satellite director it is simple to use:
1.switch on the app
2.choose satellite tab
3.tick 28.25e astra 2b/2a/1n
4.choose director
5.move phone until dot is in circleComment
Comment