Skybox F5/AJ Channel List Problems

[afiqul]

Hi, just setting up a box for a friend and done a blind scan and installed AJ's channel list.

Most of the channels work, but a lot of the HD channels are coming up with "No signal"

Am I doing something wrong here? or is there a problem with the channel list?


EDIT: I installed the channel list on my F3, and all the channels work...strange?

[mahrkpat]

When you did blind scan did you see all the channels or were some missing? eg all hd channels missing or only some or also some sd channels missing as well?

See this thread

[afiqul]

I think some SD channels may have been missing aswell..

I have the Satellite settings set up the same on both boxes. That thread makes it seem like an inherent problem with the F5's..

Will try updating to latest firmware and see how it goes..

[mahrkpat]

I don't think it is firmware problem for a solution See This Thread

[afiqul]

hmm, I already have a quad LNB and running 2 lines down from the dish, one is in my own F3 and one is in my friend's F5 so i'm not sure exactly what is going on here...

[afiqul]

Hmmm, I see this is a very common problem recently?

Blind scan has both H and V channels found, with a few failures.

The V channels gnerally only have a SNR of 7%.

Anyway of fixing this? The other thread speaks of using a diseqc, but I don't understand how these would help..