openbox s10 possibly killed by clone timebomb

[tony2803]

hi guys.
is there any software that can bring back to life an openbox s10 possibly killed by clone timebomb,will re-flash with s10 software but will not boot up after re-flash...nothing showing on front panel after turning on power,power supply is working tested on s11..thanks.

[DW190]

hi guys.
is there any software that can bring back to life an openbox s10 possibly killed by clone timebomb,will re-flash with s10 software but will not boot up after re-flash...nothing showing on front panel after turning on power,power supply is working tested on s11..thanks.

Are you flashing it with the recovery tool?

[bbb_uk]

The S10 hasn't had been updated since about 2 years ago, the latest version is dated October 2011.

Where did you download this firmware from?

See this thread about recovering from a bad flash using rs232 null modem cable.

[tony2803]

The S10 hasn't had been updated since about 2 years ago, the latest version is dated October 2011.

Where did you download this firmware from?

See this thread about recovering from a bad flash using rs232 null modem cable.

firmware was downloaded from official openbox site.
also have read quite a few pages on the topic of reflasing,it actually reflashes software to the box,but the box should reboot and come on after reflashing has finished,but it does not reboot.

[slugworth]

you have to tick include bootloader in the loader.
the loader also has the option to save 100% of the firmware back to pc.
If it doesn't work after loading, dump the firmware from receiver to pc and compare with the file you loaded using a hex editor.It should match 100%.If it does and still doesn't boot,it's a hardware problem.