Horizontal not Vertical channel browsing

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • PutTheFootieOn
    Member
    • Feb 2014
    • 75

    #1

    Horizontal not Vertical channel browsing

    After watching a few you tube clips for reference ive noticed channels can be viewed horizontally, as in the whole category across the screen in one press of a button. i can't seem to get that up and forever scrolling down to the bottom of category's to find what i'm looking for, any help appreciated

    see between 35 seconds and 55s were the listings get put up in full across the screen (how do u get that up ?)
    Last edited by PutTheFootieOn; 3 March, 2014, 09:06.
  • bigade1
    DK Veteran
    • Oct 2013
    • 340

    #2
    You don't actually say what model box you are using but in the case of a F5S you simply press the " OK " button while viewing a channel and that will bring up on screen the complete Fav category of the channel displayed horizontally across the screen as opposed to the vertical layout when using the " FAV " buttons.

    Comment

    • PutTheFootieOn
      Member
      • Feb 2014
      • 75

      #3
      Originally posted by bigade1
      You don't actually say what model box you are using but in the case of a F5S you simply press the " OK " button while viewing a channel and that will bring up on screen the complete Fav category of the channel displayed horizontally across the screen as opposed to the vertical layout when using the " FAV " buttons.
      Thx for the reply , yes f5s would be correct. when i do that it comes up exactly the same as pressing the initial fave button, Vertical listings , just in slightly diff colour

      Comment

      • bigade1
        DK Veteran
        • Oct 2013
        • 340

        #4
        My apologies - I stand corrected. After checking, the information I stated above applies to boxes with the older firmware on them. With the new type 7 day Epg firmware pressing the OK button does indeed list the channels vertically. There is an option on the box to revert to the old style horizontal display and that is to enter the Micro Panel by pressing the MP button on your remote, navigate to the GUI Config setting which should be at the bottom of your display. Enter this setting and change the GUI Config setting to " Three ". When you exit these settings pressing OK while viewing a channel will then bring up the old style horizontal display. Obviously to revert back to the new style just change the GUI Config setting back to " Whole ".

        Comment

        • PutTheFootieOn
          Member
          • Feb 2014
          • 75

          #5
          Sorted "Thx" . i am fully horizontal

          Comment

          Working...