invalid program, search again

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Hadron
    V.I.P. Member
    • Nov 2012
    • 2102

    #16
    Originally posted by freakazoid789
    yours is 12382 and mine is 12383
    I'ts not unusual for the frequency to be out by +/- 1MHz, but what is unusual is that yours shows as vertical polarisation when it should be horizontal!

    I know you said earlier that you checked the antenna setup, but can you confirm it is set to Universal (9750-10600)? Although I don't know why this should change the polarity???

    Do you have any other boxes connected at the same time to the same dish?
    Last edited by Hadron; 15 March, 2014, 14:42.

    Comment

    • digicon
      V.I.P. Member
      • Jul 2009
      • 8261

      #17
      Its called Frequency drift all Receiver/LNB combinations will or could give a different reading nothing to worry about

      Comment

      • freakazoid789
        Member
        • Dec 2010
        • 89

        #18
        Originally posted by digicon
        Its called Frequency drift all Receiver/LNB combinations will or could give a different reading nothing to worry about
        confused as to why it suddenly stopped working on the regular frequencies and all my channel lists unreadable

        Comment

        • kurrdogg
          Junior Member
          • Jul 2013
          • 23

          #19
          fix invalid programme search

          Originally posted by freakazoid789
          confused as to why it suddenly stopped working on the regular frequencies and all my channel lists unreadable
          all i did to get my channels back on was to
          1.use null modem cable
          2.go to skybox.cc
          3.download firmware for skybox f3
          hey presto all channels came back on
          i then deleted channels dun a factory reset then
          4.using null modem cable downlloaded skybox f5s firmware and loaded everthing else as well worked a treat for me
          hope this works mate as it took me a week to suss it out

          Comment

          • markd251
            Newbie
            • Jun 2014
            • 2

            #20
            I am a newbie and set up yesterday. i am getting all the free to view channels perfectly however have the same problem with the other channels it comes up invalid programme search again. do i need a channel list?

            Comment

            Working...