help with no signal on F5's

[AntonyBarnett]

Hi,

Well I just about got everything setup and working great until the last few days, at first I started getting a no signal message on most of the channels. I checked and got AJ's latest channel list and updated but this didnt reslove the issue. I have since reset the box to factory settings, done a blind scan of satellite and loaded the channel list back in but still getting a no signal message. The channels that are working are 74-79% signal strength. When I did the blind scan there where a few transponders that failed (about 6).

Does anyone have any ideas???


Many Thanks

Tony

[mahrkpat]

Check that your sat cable has become loose from the your box or the LNB.

[AntonyBarnett]

Cheers will do.

[Hadron]

Do you have any other satellite receivers connected to the same dish?

[fazz69]

it could be the tuner thermistor has gone. its a small yellow capasitor on the motherboard. u can change it or just wrap a thin wire round it. it will bring bak all ur no signal channels back

Sent from my GT-I8190 using Tapatalk

[AntonyBarnett]

Hi

Checked all the cables and all fine. Noticed though only lost the channels during day. Think it maybe lnb so ordered another dish. Think i still have the mk1 dish and lnb.

Sent from my GT-I9505 using Tapatalk