F5s output

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Scbenn
    Newbie
    • Jul 2014
    • 10

    #1

    F5s output

    Hey guys
    Is there a way of watching my f5s box in my bedroom?
    I tried a video sender but took it back as it was foggy, I wanted to ask if I can run a cable out of the box or tv to my room?
    not bothered about having to get up to change channel as it's a small apartment
    if it's possible can you tell me how too do thus and what I will need?

    thank you in advance
    Meh!
  • BrunoJ
    Top Poster
    • Jul 2013
    • 141

    #2
    Someone state the Nikkai 5.8GHz video senders works great with the SkyBox and you can change the channels over without need to go to the box.

    Comment

    • Hadron
      V.I.P. Member
      • Nov 2012
      • 2102

      #3
      ...or if you don't need to control the box from the bedroom, you could just run a cable from the composite & audio RCA (phono) connectors from the box to your TV.

      Comment

      • karakoram
        Newbie
        • May 2014
        • 18

        #4
        The best way would be with a HDMI splitter & cable, then you get high definition, next would be scart to at least get RGB, then RCA's which would give you composite, then finally an RF modulator and run it through coaxial.
        Take your pick.

        Comment

        • BrunoJ
          Top Poster
          • Jul 2013
          • 141

          #5
          What's the point of HDMI for HD if 90% of the HD channels don't work ?

          Comment

          • karakoram
            Newbie
            • May 2014
            • 18

            #6
            Originally posted by BrunoJ
            What's the point of HDMI for HD if 90% of the HD channels don't work ?
            I've got near 50 HD channels from 19.2 thankyou very much.

            Comment

            Working...