Vertical channels not working

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • lostjob
    Newbie
    • Jan 2014
    • 6

    #1

    Vertical channels not working

    I have been checking my channels why some dont work, what i have found is any on a vertical frequency, the signal quality is 10%.
    How do i fix this.
    Thanks in advance
  • vaprp
    Newbie
    • Aug 2012
    • 16

    #2
    Do a search within this forum for 'no signal issue'

    Or search for above in *bay

    Comment

    • Hadron
      V.I.P. Member
      • Nov 2012
      • 2102

      #3
      Do you have a $ly+ box (or any other satellite box) connected to the same LNB as your openbox/skybox? If so, try disconnecting it. Your missing channels should reappear.

      As vaprp says, you will need a "no signal fix" from Ebay.

      Comment

      • hamnida
        Newbie
        • Dec 2012
        • 9

        #4
        Replied to similar problem before had the same problem found it to a poor connection at the LNB. Another member responded and stated could not have been that caused the issue. Since then had the same remade off F connector (screw on type) again cured.

        Comment

        • davenchy
          Newbie
          • Sep 2014
          • 4

          #5
          had same problem mate . normally happens on quad lnb with other receivers connected. this will fix the problem cos it did for me.
          SKYBOX F3 F4 F5 AND F3S - OPENBOX S9 S10 S11 NO SIGNAL FIX | eBay

          Comment

          • colin1977
            Junior Member
            • Jan 2013
            • 21

            #6
            it sounds like your lnb could have blown. sometimes they go and you just lose either vertical or horizontal signals you can buy them from ebay

            Comment

            Working...