skybox F6 have problem On/Off can't reboot

Collapse
X
Collapse
 
  • Page of 1
  • Time
  • Show
Clear All
new posts
Previous template Next
  • pijan
    Newbie
    • Oct 2014
    • 1
    #1

    skybox F6 have problem On/Off can't reboot

    Hi all,
    My skybox F6 now have problem can't reboot and go to menu. Before that is ok until i want to upgrade sofrware. After that the decoder cannot reboot always on/off. how to clear and reset back this new software cause this decoder now can't go to menu.
    Tags: None
    • super jumbe
      V.I.P. Member
      • Dec 2008
      • 11610
      #2
      Read thread below:
      Recover Dead Skybox/Openbox Flash Using Serial RS232 Null modem Cable
      Digital Kaos
      http://www.digital-kaos.co.uk/forums/f184/recover-dead-skybox-openbox-flash-using-serial-rs232-null-modem-cable-233298/
      Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!

      Did you know People will question all the good things they hear about you but believe all the bad without a second thought.

      Note:
      All information given is to be used for educational purposes only and should not be taken seriously.

        Comment

        • mahrkpat
          DK Veteran
          • Jun 2012
          • 510
          #3
          The F6 is a clone of the openbox X5 so use this recovery method;

          OPENBOX X5 & Skybox F6 Recovery

          1. Format USB drive to FAT32 file format
          2. Create a folder named "recovery" on the USB drive
          3. Copy KD_P9000E_HD.bin file to the recovery folder on the USB drive.
          4. Connect the USB drive to the USB Port on the satellite receiver.
          5. Turn the power on the satellite receiver while pressing the OK button on the front panel.
          6. Keep the OK key pressed until showing Lxxx message on the LED of the front panel.
          7. On the TV screen it should show that the software is updating by the USB drive.
          8. The STB should now restart hopefully all should now be working
          Attached Files

            Comment

            Previous template Next
            Working...