stuck on load

[aron1961]

my f5s box isstuck on load any ideas thanx in advance

[Nobby Nutz]

my f5s box isstuck on load any ideas thanx in advance

A little bit more info would be useful.

When did it go faulty ?

Updating firmware ?

Updating Channel List ?

[aron1961]

just had new dish put up conected sat cable turn it on n just stuck on load

[Nobby Nutz]

just had new dish put up conected sat cable turn it on n just stuck on load

What does it do with Sat Cable disconnected ?

[aron1961]

same with n without sat cable ,ive gotta pull the powerlead out to power it dowd ? regards,, box just says load

[brad1234uk]

Yes I have now got the same problem after updating AJ`s most recent channel list from USB. Everything was working fine prior to this??? I have tried re booting without the satellite cable connected, without the USB connected etc. The only way I can power the box down or up is by removing the power cable ( remote controll doesn`t function) Is there anyway to force the box to boot in a safe mode? At least I could then re install firmware etc if needed?

[BrunoJ]

Hi, you need to flash your box .

Try this Recover Dead Skybox/Openbox Flash Using Serial RS232 Null modem Cable or try this one on bay SkyBox F3 F3S F4 F5 F5S Repair Service Fix - Brick - Flashing - Stuck on Load ?

[Bigalnkazz]

it could be a clone had a few clones and they dont like the new ajsat list even after reflashing via rs232 it still the same box got binned and replaced