new firmware needed

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • rodds
    Member
    • Oct 2009
    • 55

    #1

    new firmware needed

    can anyone please give me the link for firmware update for a f5 skybox thanks rodds
  • slugworth
    DK Veteran
    • Nov 2011
    • 1064

    #2
    why do you need new firmware?

    Comment

    • H0ltender
      Newbie
      • Jun 2014
      • 1

      #3
      my skybox has gone off, anyone else have this problem . cheers

      Comment

      • Punjabilad
        Newbie
        • Nov 2014
        • 6

        #4
        Originally posted by H0ltender
        my skybox has gone off, anyone else have this problem . cheers
        Well mine has developed a rebooting loop problem goes to L100 then reboots nothing comes up on screen..I need help on this please

        Comment

        • intel
          Top Poster
          • Apr 2010
          • 128

          #5
          Originally posted by Punjabilad
          Well mine has developed a rebooting loop problem goes to L100 then reboots nothing comes up on screen..I need help on this please
          Have you tried unplugging the Sat Feed and then rebooting box?

          Comment

          • Punjabilad
            Newbie
            • Nov 2014
            • 6

            #6
            Originally posted by intel
            Have you tried unplugging the Sat Feed and then rebooting box?
            Ok so just unplug the sat feed and replug and retry?

            Comment

            • Klceltic
              Junior Member
              • Apr 2013
              • 33

              #7
              if it loads up no problem with the coax out then it may show that there is an issue with your coax shorting the box. Sometimes that is because the cowboys that installed your sly didnt cut your coax proper. You need to take off the F connecter to see if there is any lose copper wires touching the f connecter that can cause it to boot. I would check it in a mates house as well if it works fine there is an issue somewhere at your end causing the issue. A blown LNB or just something shorting it. Should be easy to fix.

              Comment

              Working...