no signal on vertical channels?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • singh1234
    Top Poster
    • Aug 2009
    • 156

    #1

    no signal on vertical channels?

    hi hope somebody can help, I have just put in another skybox so running 2 off a quad lnb, on 1 of the boxes channels like ssp2 and most movies don't work just show no signal,all other work fine,if switch one box off channels work, wud I need a no signal fix I hav been reading about???? thanks
  • singh1234
    Top Poster
    • Aug 2009
    • 156

    #2
    sorry I mean both boxes are showing no signal on v channels?

    Comment

    • P&D
      DK Veteran
      • May 2010
      • 2686

      #3
      Do you have the original S*y box on at the same time if so turn it off see if you get the channels back

      if you don't then yes you need the No signal fix

      Comment

      • singh1234
        Top Poster
        • Aug 2009
        • 156

        #4
        no mate got v5s in both rooms,if take 1 off other one works if I take plug out,just got a new quad dish put up. so wud the no signal fix the problem and do I hav to get 2 I take it?

        Comment

        • P&D
          DK Veteran
          • May 2010
          • 2686

          #5
          Have you got a cable from the lnb one to each box ??
          could be the settings on the boxes wrong
          if everything is correct the no signal fix should work....not sure if you would need 2 of them....but there cheap enough to buy 2

          Comment

          • singh1234
            Top Poster
            • Aug 2009
            • 156

            #6
            Originally posted by P&D
            Have you got a cable from the lnb one to each box ??
            could be the settings on the boxes wrong
            if everything is correct the no signal fix should work....not sure if you would need 2 of them....but there cheap enough to buy 2

            Yes mate seperate cable to each box, just had a quad dish put up with a box in each room, and if take one off other v channels wirk, so best me getting no signal fix yh?

            Comment

            • chipachap
              Newbie
              • Aug 2013
              • 4

              #7
              I had the same problem, even though it was a new LNB it was faulty. Try another one if you can.

              Comment

              Working...