v6s puzzled

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • breeville
    Member
    • Mar 2011
    • 69

    #1

    v6s puzzled

    i got a new v6s box

    had no issues before

    this box for some odd reason only plays some channels
    when i insert the gift and reboot

    doesnt play all of the channels. not scrambled nothing. just says no signal or remains black screen

    checked network and its ethernet and green so its fine

    box was new and i didnt edit nothing.

    i have since tried to upload the latest firmware successfully from www.skybox.cc (although says openbox on it its the same as the skybox v6s)

    what is wrong with it?


    just the channels show no signal or black yet bbc plays perfectly

    used AJ's list and cwaites.

    could it be the satelite settings or something? i have never adjusted these ever
    Last edited by breeville; 23 September, 2015, 19:11. Reason: removed the banned crap
  • gmb45
    Admin Assistant
    • Nov 2008
    • 7538

    #2
    your going down a banned topic here m8 !!!
    support mountain resue

    support digital-kaos here


    forum rules

    no keygens or torrents to be posted no autodata discussions

    pish pt walkers


    Comment

    • P&D
      DK Veteran
      • May 2010
      • 2686

      #3
      Hi to find out if the box is seeing the channel from the Sat 28.2
      Do a blind scan see what channel it picks up....if it pick the all up then nothing wrong with the dish or cable
      Then you know its the setting on the box
      or even the box knacked

      Also after 60 post you would of thought you have read the rules about G**ts & S**V**s & on or off L**e....It all comes under C/S talk

      Good luck with the box

      Comment

      • breeville
        Member
        • Mar 2011
        • 69

        #4
        updated to remove the banned keywords

        im just curious if its something in settings or what

        from my gathering when you flash the box it doesnt save the settings. you start from scratch.

        Comment

        • P&D
          DK Veteran
          • May 2010
          • 2686

          #5
          Just do a blind scan see if you get all the channels
          If yes then i'm sure you will find the correct setting with google
          or a member will point you in the right direction

          Sorry i cannot ....not used one for 2 years

          Comment

          Working...