Help..

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Dannycorfield
    Newbie
    • Dec 2015
    • 4

    #1

    Help..

    Hi iv had a skybox f3 for about a year.. All of a sudden getting problems with certain channels. Sky sports 1/2/ news all scrambled /no signal at times. Rarely watchable for any length of time. Iv tried 2 different ~~~~~s. I have no idea wat the problem is? Any help/guidance would be greatly appreciated as these are the channels i use most
  • mezzyg
    Top Poster
    • Apr 2010
    • 158

    #2
    How is the signal? Press info button 3 times on say sky sports. What Is the signal quality?

    Sent from my Nexus 6P using Tapatalk

    Comment

    • Dannycorfield
      Newbie
      • Dec 2015
      • 4

      #3
      Intensity.. 84%
      Quality.. 73%.

      Its just choppy/scrambles/cuts up/freezes. Most the other channels fine though!!

      Comment

      • P&D
        DK Veteran
        • May 2010
        • 2686

        #4
        Both are good as they can be with your box

        Firmware problem or where you get your TV from.....The latter would be my guess

        Scrambled channels & no signal are 2 different things.........
        what is the firmware on the box Menu/system info
        Last edited by P&D; 17 December, 2015, 22:13.

        Comment

        • Dannycorfield
          Newbie
          • Dec 2015
          • 4

          #5
          Software version.. 3601HD_14_01_2013_0f23

          Comment

          • P&D
            DK Veteran
            • May 2010
            • 2686

            #6
            Could be firmware there is a later release http://skybox.cc/down.asp?id=9

            download it & flash the box.......but back everything up from the box before doing anything
            when you flash the box it overwrites the software on the box.......

            when you flash it......make sure you tick keep DBS settings


            How to flash your box......

            1 - Formatted USB to Fat32, Put your Image File onto your USB & plug into your Box.
            2 - Switch Your Skybox ON.
            3 - Select menu on your remote, Use the Left & Right arrow keys & go to Tools, Press OK.
            4 - Use the Up & Down arrow keys on remote & go to Upgrade by USB, Press OK.
            5 - Now select Image Mode, Go down to Keeping DBS & Settings & Select "Yes"
            6 - Go to Start & Press OK.it will now load the Firmware & ask you to confirm, Press OK.
            7 - It will now load the Firmare & Reboot your Box.
            8 - Your new firmware should now be Installed.


            Also who's channel list is on the box ?......when was it last updated
            Last edited by P&D; 17 December, 2015, 22:26.

            Comment

            • Dannycorfield
              Newbie
              • Dec 2015
              • 4

              #7
              I got no idea how to do anything with the box so il wait for my mate to do it for me. I updated the channel list yesterday it was easy enough. AJ something i think?

              Comment

              • P&D
                DK Veteran
                • May 2010
                • 2686

                #8
                All i can say is learn how to.........so then you don't miss anything you need to watch when your mates busy
                loads of info on How to do's on the openbox's on here

                Its a simple system......Knowledge is food for the brain

                Comment

                • super jumbe
                  V.I.P. Member
                  • Dec 2008
                  • 11610

                  #9
                  Check the capacitors on the power board they get swallon.
                  Tools owned: Hammer, Chisel, Crowbar, Punch, Chainsaw, Cutter and Brain!!!

                  Did you know People will question all the good things they hear about you but believe all the bad without a second thought.

                  Note:
                  All information given is to be used for educational purposes only and should not be taken seriously.

                  Comment

                  Working...