Openbox S9 new firmware 01 02 2011

[dell_xps]

M_HDS2_CMT_1011161214.abs
look for this file m8, i was getting the fault as you described until I installed this firmware.
Do a factory reset, format your memory stick then load it up.
HTH

[Data7]

You have to remember if people have rescanned the channels and then saved the image it will have saved the bolloxed channels that were removed in the original moded image. it aint no sweat to get rif of the 8 channels that cause the reboot. I do it all the time. but when I do a rescan for updateing the channels I have to go threw them all again to get rid of them.

[Data7]

M_HDS2_CMT_1011161214.abs
look for this file m8, i was getting the fault as you described until I installed this firmware.
Do a factory reset, format your memory stick then load it up.
HTH

If you instal this version you will get glitching on the HD channels. so be warned.

[mept1]

If you instal this version you will get glitching on the HD channels. so be warned.

why? explain

[dell_xps]

Yes please explain that one m8 ?
Your firmware when I load it up doesn't show
up the sat Im after in the list, do I just press zoom on remote
and it should find it, not very clear for a newb m8.

[Data7]

there was two firmwares released one ending 214 with the server details showing and one version ending 216 that hides the server details. When I tested each one the 214 played up on the hd channels so use at your own risk. Just pointing out what will happen.
PS the image i gave a link for is for a multisat setup if you only need 28.2 just untick the other satellites. or better still delete all the channels in the first icon in the menu. and load your old tp-prog over it. the image will still give you all the new channels but you will have to clean up the changed satellite channels.

[dell_xps]

Ok m8, going to load this onto the box today.
I only need 28.2, will report back if I can get it working,
cheers for the tip.

[dell_xps]

Ok m8, did what you said, and all good, keep getting a message saying moving dish when changing channel sometimes, apart from that all good.
Might look at getting a motorised dish now, sat is the way forward !!

[southpaw]

can anybody tell me how to find out which firmware is on the box , i have new box this week , and just wondering if i need to update it , or just stick a favs list on

[billy1977]

yep it aint rocket science

[hooley]

can anybody tell me how to find out which firmware is on the box , i have new box this week , and just wondering if i need to update it , or just stick a favs list on

What does it say in the version? This tells you what firmware you are on. You can find this by menu/tools/information. Version is on the fourth line.

[southpaw]

What does it say in the version? This tells you what firmware you are on. You can find this by menu/tools/information. Version is on the fourth line.

cheers mate , 4th line says HDS2-10-07-12-0290CMT

Is this an old firmware ?

btw , thanks for that reply billy , nice start to the forum , i can see you gonna be a really helpful poster ,

[hooley]

cheers mate , 4th line says HDS2-10-07-12-0290CMT

Is this an old firmware ?

btw , thanks for that reply billy , nice start to the forum , i can see you gonna be a really helpful poster ,

Thats a very old one man, newest one is here.http://www.digital-kaos.co.uk/forums...7/index26.html
down the bottom of the page

[Starteck2002]

Hi, I'm new to the OpenBox (other boxes i have are Dreambox 500, 600 and 800HD and a spiderbox). Does this firmware have issues with clone boxes or is there any such thing?

[bowden2010]

hi i have just bought a box can someone tell me how i set it up iv orderd a 48 hour cline i am waiting for it can any one help me with the basics