OSCAM - CCAM on Debian linux

[braindead]

Can anyone help on my venture into OSCAM. I have installed OSCAM and CCcam using an install script and it all went ok. But im used to CCCAM and OSCAM is just that little harder. I have been reading for weeks on this and I cant get it to work.

below is the oscam log file. If anyone could point out where i'm going wrong it i'd really apprieciate it

> OSCam << cardserver started at Thu Jun 2 10:18:27 2011
-------------------------------------------------------------------------------
2011/06/02 10:18:27 B74676B0 s >> OSCam << cardserver started, version 1.00-unstable_svn, build #5344 (i686-pc-linux)
2011/06/02 10:18:27 B74676B0 s version=1.00-unstable_svn, build #5344, system=i686-pc-linux, nice=-19
2011/06/02 10:18:27 B74676B0 s client max. idle=120 sec, debug level=0
2011/06/02 10:18:27 B74676B0 s max. logsize=10 Kb, loghistorysize=4096 bytes
2011/06/02 10:18:27 B74676B0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/02 10:18:27 B74676B0 s Cannot open file "/emu/oscam/oscam.services" (errno=2 No such file or directory)
2011/06/02 10:18:27 B74676B0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
2011/06/02 10:18:27 B74676B0 s signal handling initialized (type=sysv)
2011/06/02 10:18:27 B74676B0 s can't open file "/emu/oscam/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
2011/06/02 10:18:27 B74676B0 s can't open file "/emu/oscam/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
2011/06/02 10:18:27 B74676B0 s can't open file "/emu/oscam/oscam.provid" (err=2 No such file or directory), no provids's loaded
2011/06/02 10:18:27 B74676B0 s can't open file "/emu/oscam/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
2011/06/02 10:18:27 B74676B0 s monitor: initialized (fd=8, port=988)
2011/06/02 10:18:27 B74676B0 s camd33: disabled
2011/06/02 10:18:27 B74676B0 s camd35: disabled
2011/06/02 10:18:27 B74676B0 s cs378x: disabled
2011/06/02 10:18:27 B74676B0 s newcamd: initialized (fd=9, port=30000, crypted)
2011/06/02 10:18:27 B74676B0 s CAID: 1F1F
2011/06/02 10:18:27 B74676B0 s provid #0: 000000
2011/06/02 10:18:27 B74676B0 s radegast: disabled
2011/06/02 10:18:27 B74676B0 s http disabled
2011/06/02 10:18:27 B74676B0 s creating thread for device /dev/ttyUSB0
2011/06/02 10:18:27 B74676B0 s loadbalancer: can't read from file /tmp/.oscam/stat
2011/06/02 10:18:27 B74676B0 s waiting for local card init
2011/06/02 10:18:27 B7422B90 r reader thread started (thread=B7422B90, label=smartcard, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/06/02 10:18:30 B7422B90 r smartcard card detected
2011/06/02 10:18:36 B7422B90 r ATR: 3F FD 13 25 02 50 00 0F 33 B0 0F 69 FF 4A 50 D0 00 00 53 59 02
2011/06/02 10:18:38 B7422B90 r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] parental lock setting: 3F 00 0E 00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] type: VideoGuard BSkyB (0963), caid: 0963
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] serial: xxxxxxx, BoxID: xxxxxxxxx, baseyear: 1997
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] ready for requests
2011/06/02 10:18:40 B7422B90 r found cardsystem videoguard2
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] smartcard card detected
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] type: VideoGuard BSkyB (0963)
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 0003, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 000b, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 0010, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 001d, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 30e1, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 30e2, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 30e3, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 30e4, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: 30e5, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b732, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b736, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b765, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b766, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b772, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b773, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b846, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b860, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b8d2, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:40 B7422B90 r [videoguard2-reader] tier: b991, expiry date: 2011/07/28-00:00:00
2011/06/02 10:18:41 B74676B0 s init for all local cards done
2011/06/02 10:18:41 B74676B0 s anti cascading disabled

[davvo]

post your configs

[bj1]

im looking for latest oscam for tm500 i dont want it for share just so i can watch sports , movies on tm500 without boxkey any help please?

[braindead]

post your configs

I seem to have most of it working but not communicating with CCcam as per the folowing log;
-------------------------------------------------------------------------------
>> OSCam << cardserver log switched at Fri Jun 3 10:24:09 2011
-------------------------------------------------------------------------------
2011/06/03 10:24:09 B739DB90 c >> OSCam << cardserver log switched, version 1.00-unstable_svn, build #5350 (i686-pc-linux)
2011/06/03 10:24:09 B739DB90 c version=1.00-unstable_svn, build #5350, system=i686-pc-linux, nice=-19
2011/06/03 10:24:09 B739DB90 c client max. idle=120 sec, debug level=0
2011/06/03 10:24:09 B739DB90 c max. logsize=10 Kb, loghistorysize=4096 bytes
2011/06/03 10:24:09 B739DB90 c client timeout=5000 ms, fallback timeout=2500 ms, cache delay=0 ms
2011/06/03 10:24:09 B739DB90 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/06/03 10:24:09 B739DB90 c thread B739DB90 ended!
2011/06/03 10:24:19 B739DB90 c client connected to 30000 port
2011/06/03 10:24:19 B739DB90 c user test1 is trying to connect but doesnt exist ! (CCcam)
2011/06/03 10:24:19 B739DB90 c plain newcamd-client 127.0.0.1 rejected (no such user)
2011/06/03 10:24:19 B739DB90 c thread B739DB90 ended!
2011/06/03 10:24:30 B739DB90 c client connected to 30000 port
2011/06/03 10:24:30 B739DB90 c user test1 is trying to connect but doesnt exist ! (CCcam)


Here are my configs
CCcam N Line
N: 127.0.0.1 10000 test1 test2 01 02 03 04 05 06 07 08 09 10 11 12 13 14 256

SERVER FILE
[reader]
label = slot1
protocol = internal
device = /dev/ttyUSB0
boxid = xxxxxxx
lockemm-u = 0
block
emm-s = 0
block
emm-g = 1
block
emm-unknown = 1
emmcache = 1,3,2
group = 1
caid = 0963

CONF FILE
[global]
nice = -1
WaitForCards = 1
logfile = stdout
prefer
localcards = 1
saveinithistory = 1

[webif]
httpport = 8888
httpuser = admin
httppwd = admin
httpallowed = 192.168.0.1-192.168.0.20

# protocols
[newcamd]
key = 0102030405060708091011121314
port = 10000@0963:000000;10001@0963:00000

USER FILE
[account]
user = test1
pwd = test2
monlevel = 0
uniq = 0
group = 1
au = 1
caid = 0963

[davvo]

the path to cccam where did the install script put it
oscam cant find it hence

c user test1 is trying to connect but doesnt exist ! (CCcam)

c plain newcamd-client 127.0.0.1 rejected (no such user)