Usals set but dish doesnt move unless in set up screem

[spagglerock]

Hi There,
I have set the usals and stored 2 sats, 13e & 28e. To move between the 2 I have to use the setup screen and move to position (after selecting the tune function).
On my DM7000 it moves automatically when you select the channel from the list, i cant see why the DM800 isnt doing the same
Image is Gemini
Cheers
Spagglerock

[mdt]

Hi There,
I have set the usals and stored 2 sats, 13e & 28e. To move between the 2 I have to use the setup screen and move to position (after selecting the tune function).
On my DM7000 it moves automatically when you select the channel from the list, i cant see why the DM800 isnt doing the same
Image is Gemini
Cheers
Spagglerock

send your motor to zero in the menu,s then re-boot the box and then try it, regards mdt

[benny/9]

Hi There,
I have set the usals and stored 2 sats, 13e & 28e. To move between the 2 I have to use the setup screen and move to position (after selecting the tune function).
On my DM7000 it moves automatically when you select the channel from the list, i cant see why the DM800 isnt doing the same
Image is Gemini
Cheers
Spagglerock

****************************************
i had a mates dm800 clone and before that moved the dish on usuals
i had to set the advanced menu for diseqc 1.2 and set
the sats up he wanted on his list. plus i set each sat from west to east
and numbered them from 30w at number 1 and so on for each
sat set in the menu, then i load a channel list, then went back to tuner
set up and changed ir to simple then possitioner entered the long/lat and
the dish then found every sat, here's a good site for your long/lat settings
just put your post code in the search bar:-- add hh to the link
h**p://itouchmap.com/latlong.html

[spagglerock]

Thanks for quick replies
Tried both the above and no success.
Now dish wont move at all. Suspecting the motor.
Any quick ways to check the motor?

[benny/9]

Thanks for quick replies
Tried both the above and no success.
Now dish wont move at all. Suspecting the motor.
Any quick ways to check the motor?

**************************************
you said your other box moves the dish
are you certain the long/lat settings are
set the same as that box,
and you have a channel list loaded

[Nutsandbolts]

HI. Always check that the motor green light is on. If no light check cables inserted correctly. If using USALS dish should always move automatically. Is motor USALS compatible? Regards.