HELP (NO CA FOUND)

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • soulmandave
    Junior Member
    • Apr 2010
    • 20

    #1

    HELP (NO CA FOUND)

    Hi all.

    I'll try and keep this short.

    I have a DM800 HD SE A8P (Clone) I've been flashing various images into the box over the last week or so without any problems.

    I then found that images that I had previously flashed into the box no problem were coming up with the "INVALID" (Or Old Version) message.

    I looked at the device information tab on the web interface and noticed that the bootloader version had gone down to an earlier version originally it was version 84

    I can't remember the number of the earlier version to which it had changed but after a little homework I thougth that this must be the problem.

    I then tried to flash the version 84 bootloader into the box and ended up with the dreaded "R01 NO CA FOUND" message on the front display.

    After some messing around I have managed to communicate with the box using Dreamup.

    I can get Dreamup to the point were it says "BOX IS NETWORKED IN HTTP MODE" but if I attempt to flash an imagine into the box it just goes to "Calculating Checksum" and stays there.

    Please someone tell me that I can recover this box and that I haven't turned it into a doorstop.

    Any help and advice would really be very much appreciated.

    Thank you and regards, The Soulman.
  • toysoft
    DK Veteran
    • Nov 2008
    • 752

    #2
    It seems fixed, If I am not wrong now ;o)

    TS

    Comment

    Working...