Commando 14.6 DM500 Release

[spudorange]

Thanks pap

wondered what was happening

Earlier today, BskyB kindly went and busted LraiZer's GetEPG. How? By changing the special stream epg service "EPG Background Audio." from service_type="02" (radio) to service_type="82" (data)

The problem will become apparent after a run of AutoBouquets

I've come up with a quick and easy fix for this hassle. Just unrar the attached init file and pop it into /var/etc

NOTE: If you are already using a /var/etc/init custom file, then edit your file by appending my new lines to the end of it. This file does NOT need chmod treatment.

After running AutoBouquets, please reboot your box! (This will be automatic in our next release). If you are running AutoBouquets on a scheduled auto Timer, please add a Reboot timer for 20 minutes later.

Cheers- AL

[bountyhunter21]

Hello... Help Please...
I have a DM 500s (CLONE)
Is this image Clone Safe?
Non Time Bomb Or something?
Cause i dont see any instructions, Do i Install it with FlashWizardPRO? As i usual do?
Please someone...
Be nice and Help...

[teds]

yes the commando is clone safe.
flash commando image to box using dreamup with a null cable
should take about 12-15mins,when done disconnect and connect
box to tv/router,turn tv and box on you should have free to air.
using dreambox control centre (dcc)you need to ftp 2 files to the box.
These files are CCcam.cfg and CCcam.pcc you can download these
by googleing CCcam.pcc,unpack it there are a few files
in there but you only need these two.
put the 2 files CCcam.cfg and CCcam.pcc on your desktop.
run dcc getting your user/password right and
your ip address,when you have solid green line
press ftp.you should have 2 panels with files in
1 on the left 1 on the right.the 1 on the right
isr pc,click user in the one on the right
and find desktop, in desktop you will see the 2
files you downloaded.now in the panel
on the left double click var/etc then in panel on right
click CCcam.cfg and click the arrow
in the middle of the panels the 1 pointing left and you will
see it load up.click green arrow top of panel
on left twice.then double click var/bin/emu,in
panel on right click CCcam.pcc and then click arrow
in middle pointing left,you will see file loading up.
when loaded right click and rename file to CCcam
this is important for it to work,dont forget
first 2 letters are capitals.
just put your line in CCcam.cfg and your away.
dont forget to turn CCcam on
by pressing blue,commando extras menu
softcam menu and turn CCcam on.job done.enjoy.

you can download commando off first page on this thread.
hope this helps.
TEDS.

[spudorange]

get epg error has re occurred (help needed)

Ok I know I can flash the box and recopy init over to var etc but need to understand what happened.

A friend is missing some asian channels and as I don't remember what to me are obscure names and a bit late to phone so
I thought I would just swap their box after rescanning here.

I have this one set for rtepg and it works fine (well it did)

I set my location but when finished I pressed the rt getepg it immediately showed 0.0.0 etc
loading complete 0 minutes 0 seconds

Using lraizer one does the glitching error from my post a week ago.

No amount of reboots or re copying over init helps.

I will reflash the box to take over tomorrow and await a reply but to recap.

Box works fine for a week after copying init file.

Load set my location & reboot (problem is back)
ftp init into var/etc (problem same)
delete init and re copy (problem same) (also tried a reboot)

Which means that if I get someone to do a set_my_location it will corrupt and will need a box swap (I assume)

Appreciate knowing why it is happening please

thanks

[psats]

save your new scanned files to pc then reload on your fresh install
??? why not use getepg from stream.

[sidvic]

Flash image using Flashwizard Pro

My Pc does not seem to have com ports ! so will not even open Dreamup...
I don't understand why it is recommending flashing using null cable rather then Flashwizard through a router, i am just about to attempt it anything i need to know ) >?

[smirnoff_rules]

wot image have u on the box now ?

[spudorange]

I already do that but the point I made is really about the following.

a get a call saying missing channels so I tell them to rescan and after they do it I am told the bouquets are messed up.

I tell them to run autobouquets, which they do.

NOW EPG is shagged meaning EVERY box has to come back, reflashed etc and taken back !!!BALLACHE!!! big style especially as some are VERY far away and can only be posted.

Have reflashed the 14.6 on this one and everything is fine (but only after reflash as mentioned, no other way of fixing it that I can see)

save your new scanned files to pc then reload on your fresh install
??? why not use getepg from stream.

[spudorange]

Hi mate if this message was for me then I am using 14.6

ta

wot image have u on the box now ?

[pjmorie]

Just wondering can someone point me in the direction of an update for the Picons for a DM500S?
I've tried the update pack on this link http://www.digital-kaos.co.uk/forums...am-vix-306733/ but these icons are in a .png format and don't seem to show up.

[psats]

Just wondering can someone point me in the direction of an update for the Picons for a DM500S?
I've tried the update pack on this link http://www.digital-kaos.co.uk/forums...am-vix-306733/ but these icons are in a .png format and don't seem to show up.

any updated picons for 14.6 will be found on the u k c v s n e t support site

[pjmorie]

any updated picons for 14.6 will be found on the u k c v s n e t support site

I tried searching there but can't find anything other than an update that was released for V14.4 in 2011, it's not a big, hopefully when V14.7 is released there will also be an updated picon file.

[psats]

I tried searching there but can't find anything other than an update that was released for V14.4 in 2011, it's not a big, hopefully when V14.7 is released there will also be an updated picon file.

look in the neutrino section

[encode77]

thanks for your hard work,i am a complete noob with this but going to give it a go.

[master11]

Thanks for all the hard work here..its working a treat!