Commando 14.7 DM500 Release

[Kalipo]

meant to edit and add to it in the morning after rollback to see if problems where still there ,

l was havnin problems with the epg and some times the bouquets were missing and only 2 left interactive and one other

lip sync on fta channels as well as movies , out by alot sometimes . just have to change channels and was ok

might be a bad flash , lm daughter has this 14.7 but l didnt update hers last time

its fine again now tho ? will do a clean reinstall when l get a chance incase its a bad update

, posted a 12pm after the wife said she couldnt choice any channels

exact same issue as i posted 1 page back...

Funny how i didnt get a reply..

[NICETOBNICE]

hi guys i have a problem with my auto boquets it goes through the proces finds 651 channels but then screws up the bouquets any idea what to do ?

[NICETOBNICE]

update guys i have updated the image and deleted the version file from within ftp then upgraded the image it was sucessfully updated but i still have the same problem?

when it scans it finds all channels then it hits a problem when doing the mapping of the bouquets
has anyone had this issue ?

[smirnoff_rules]

u can try my backup . its before last update and see if the problem goes . has c**ms too http://rapidshare.com/files/18429372...up30.01.13.rar

add to temp and manual install

[BadBoyR]

For lipsync issues you need to keep it on the same channel and you will eventually see it, however when you change the channel it is back to normal.

[NICETOBNICE]

u can try my backup . its before last update and see if the problem goes . has c**ms too http://rapidshare.com/files/18429372...up30.01.13.rar

add to temp and manual install

Thanks mate still the same cant understand it ?

[DiNGi]

menu / services / scan modes / ok

Thanks for the directions - however upon attempting to manually scan a transponder I keep getting the following message.

'Transponderscan failed'

I save the transponder, go back a screen, set the satellite I want (as I can not select the satellite I want in the previous screen) and press Scan now.

Any ideas? Thanks in advance.

[PaphosAL]

Exactly at what point does it 'screw up' please, NICETOBNICE, and with what sort of popup message?

Cheers- AL

[PaphosAL]

Thanks for the directions - however upon attempting to manually scan a transponder I keep getting the following message.

'Transponderscan failed'

I save the transponder, go back a screen, set the satellite I want (as I can not select the satellite I want in the previous screen) and press Scan now.

Any ideas? Thanks in advance.

PLEASE! Can you tell us EXACTLY what you're trying to do here, step by step, and for WHICH satellite, and WHY?

It might help us give a proper answer to your cloudy question, m8...

Thanks- AL

[karl1234]

I have downloaded this image and cant get CCcam 2.1.4 - The Gemini on to it. i have tired several web page but all time show me the same instruction. but it does not work on this image or just am doing something wrong. can you please help.


this is the instruction that i followed.......................................... ....................

[digicon]

I have downloaded this image and cant get CCcam 2.1.4 - The Gemini on to it. i have tired several web page but all time show me the same instruction. but it does not work on this image or just am doing something wrong. can you please help.


this is the instruction that i followed.......................................... ....................

Read the rules please: http://www.digital-kaos.co.uk/forums...rules-2/#post2 especially this one: Linking to CS Payservers for any reason is not allowed

[DiNGi]

PLEASE! Can you tell us EXACTLY what you're trying to do here, step by step, and for WHICH satellite, and WHY?

It might help us give a proper answer to your cloudy question, m8...

Thanks- AL

Hello Al,

Ok, I am trying to scan a transponder that carries ERT World for HELLAS SAT 39.0East.

I go to the service scan menu and set it to one transponder.

I input the position, symbol rate etc but can not set the satellite to HELLAS SAT here (its greyed out on EutelSat 13.0e)

So I save my changes, go back a screen (back to service scan) and set the satellite to HELLAS SAT here on this screen.

I save my changes and go to scan now. Upon 3-4 seconds I get a popup saying Manual Transponder Scan failed (or something along those lines can confirm word for word when back home).

Have checked ERT World transponder on both KingOfSat and LyngSat for Hellas - both same variables.

Thanks in advance.

[DiNGi]

Sorry forgot to mention - I can watch RIK Sat on HELLAS SAT perfectly so I know the dish can reach that satellite.

[PaphosAL]

OK, Dingi, I see what you are trying to do now, I think. Make a backup of Satsearching's global /var/etc/satellites.xml and ADD your missing transponder in an edited version, with the new transponder frequency line being inserted in the correct freq numerical order, like so:

<sat name="Hellas Sat 2 39.0E" flags="0" position="390">
        <transponder frequency="10956000" symbol_rate="4123000" polarization="1" fec_inner="5" system="0" modulation="1"/>
        <transponder frequency="10964000" symbol_rate="3300000" polarization="1" fec_inner="3" system="0" modulation="1"/>
        <transponder frequency="10973000" symbol_rate="3125000" polarization="1" fec_inner="3" system="0" modulation="1"/>
        <transponder frequency="10977000" symbol_rate="3125000" polarization="1" fec_inner="3" system="0" modulation="1"/>
        <transponder frequency="10984000" symbol_rate="5926000" polarization="1" fec_inner="4" system="0" modulation="1"/>
        <transponder frequency="11012000" symbol_rate="30000000" polarization="1" fec_inner="3" system="1" modulation="2"/>
        <transponder frequency="11044000" symbol_rate="14400000" polarization="1" fec_inner="3" system="0" modulation="1"/>
        [COLOR=#ff0000][B]your new line for 11053000 goes here[/B][/COLOR]
        <transponder frequency="11078000" symbol_rate="4070000" polarization="1" fec_inner="5" system="0" modulation="1"/>
        <transponder frequency="11097000" symbol_rate="6111000" polarization="0" fec_inner="3" system="0" modulation="1"/>

And then Scan that satellite, NOT one transponder. That method fails, because the transponder doesn't exist in satellites.xml

Yia mas! AL

[kurnal]

Hi all, I've successfully loaded the commando 14.7. Have read and re-read the help files but I'm struggling to get the epg data to populate for international channels. Everything else works as should and also have epg data for most of the bouquets such as movies, music, kids etc. Its just international channels along with shopping, religion that are not populating. I have re-run the bouquets etc as mentioned within this thread but the problem still persists. Please could someone advise as it would be greatly and much appreciated. Thanks