Tuner - nothing connected

[student]

Unfortunately nothing, it doesn?t seem to move from 28.2 at all.

Is there anything else I can try?

Does it make any difference if while flashing the box the sat coax is connected to the box or not?

[student]

This is my satellite stting if it helps, is there any mistake please?

Configuration Mode > advanced
Satellite > Eurobird1/Astra2A/2B/2C/2D (28.2E)
LNB > LNB 1
Priority > Auto
LOF > Universal LNB
Voltage mode > Polarization
Tone mode > Band
DiSEqC mode > 1.2
Toneburst > None
Commited DiSEqC command > None
Fast DiSEqC > no
Sequence repeat > no
Command order > committed, toneburst
Uncommitted DiSEqC command > None
DiSEqC repeats > None
Longitude > 00X.XXX East
Latitude > 0XX.XXX North
Use Power Measurement > yes
Power treshold in mA > 050
Rotor turning speed > Fast
Use usals for this sat > yes

I am seriously running out of ideas, so any help will be more then welcome. Thanks

[westkill]

in your longtitude im sure what ever your cordinates are im sure it should be on west
mine are
****long 1.013 west****
****lat 51.444 north****

have you double checked yours
and is there a way to restart your motor there should be a button under the motor and check the coaxal cable on the motor
just a thought

[student]

Mine coordinates are filled in, just didn?t want to publish them on the net. I will have a look at the option with the motor, when I can as I off on holiday soon and motor is high up. I?ll report back them.

Thanks for the help so far.

[scorpion007]

Hi again I have noticed sometimes scans don't work unless you
first put in a transponder manually on a sat you want to scan
then when it has found some channels do a full scan this usually
gets the tuner to wakeup and start actually locking into transponders.good luck.