WHITE Sky Card?

[satwino]

Hi All, does anyone know about the card reader modification you can do on the 7020 I think it concerns a resistor swap? so the White sky cards dont burn out....they run at a lower voltage?
tia Andy

[firestorm]

if you use your card with newcs you can lower the voltage by going into var/tuxbox/config/newcs.xml
then you will see a script like this in edit mode chane the <mhz>358</mhz> to alter the voltage


<readers name="Dreambox SCI">
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>None</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<pincode>0000</pincode>
<priority>Hard</priority>

[Jack Jumpin]

Will this work in a 7000 as well do you know ??

Thanks
JJ

[firestorm]

yes you will be able to change the voltage buy doing this but there is a bit more to do to get the card to work there is a thread on here about it

[www.1234max.com]

if you use your card with newcs you can lower the voltage by going into var/tuxbox/config/newcs.xml
then you will see a script like this in edit mode chane the <mhz>358</mhz> to alter the voltage


<readers name="Dreambox SCI">
<globals>
<listening-ip>127.0.0.1</listening-ip>
</globals>
<device>
<name>SCI Lower Slot</name>
<type>sci</type>
<mhz>358</mhz>
<node>/dev/sci0</node>
<parity>None</parity>
<reset>normal</reset>
<export>Yes</export>
<enabled>Yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<blockC0>Yes</blockC0>
<carddetect>Yes</carddetect>
<newcamd_port>15000</newcamd_port>
<autosid>Yes</autosid>
<pincode>0000</pincode>
<priority>Hard</priority>

<MHZ> is the unit for frequncy and has nothing to do with Voltage,measured in V <volts> my Friend

[ohno]

Hi All, does anyone know about the card reader modification you can do on the 7020 I think it concerns a resistor swap? so the White sky cards dont burn out....they run at a lower voltage?
tia Andy

my white sly card running without problem constently for over 10 months in 7020 no mod and cccam 214 since the day it was released justblock emm and update in sly box at the moment.