well that mean the 1stage boot is ok its your second you need to repair if so use this way make shore you use NFI file use this one https://www.dream-multimedia-tv.de/d...dcenter#DM7020 and follow the setup below rember to have youe cat5 cable in and the dreambox online or use no need to be online if useing null moden cable and dreamup rember not to power the dm until it asks Power down the Dreambox, either using "shutdown" (to enter the deep-standby mode) or by using the power-switch. Standby is not enough!
Press and hold the lower frontpanel button.
Switch on the dreambox, either by using the powerswitch or, in deep-standby mode, press the power button. Still, hold the lower button.
A text "*** STOP ***" should appear. If something like "/flash".. appears, you didn't hold the right button.
Now you can release the button. The bootloader entered the "waiting" mode.
Above the "*** STOP ***" text, there should appear an IP-address (four decimal values with a dot in between). If there appears the string "dhcp" instead, the box still searches for a DHCP server. Wait a bit. If it doesn't change, something doesn't work with the DHCP server. Check wether network cable is plugged in etc. If it just doesn't work, set an IP using the serial terminal)
Now, open a browser on your PC. enter in the address line "http://ip/" (where ip must be replaced with the value in the LCD).
on the bottom of the page, there's a link called "firmware upgrade". Click it.
On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi" extension. You can't flash other images (like .img)!
Click on "FLASH!" and wait. It might take some time to upload and flash the image.
Switch the box off again, and on again. The new image should be flashed and working.
Press and hold the lower frontpanel button.
Switch on the dreambox, either by using the powerswitch or, in deep-standby mode, press the power button. Still, hold the lower button.
A text "*** STOP ***" should appear. If something like "/flash".. appears, you didn't hold the right button.
Now you can release the button. The bootloader entered the "waiting" mode.
Above the "*** STOP ***" text, there should appear an IP-address (four decimal values with a dot in between). If there appears the string "dhcp" instead, the box still searches for a DHCP server. Wait a bit. If it doesn't change, something doesn't work with the DHCP server. Check wether network cable is plugged in etc. If it just doesn't work, set an IP using the serial terminal)
Now, open a browser on your PC. enter in the address line "http://ip/" (where ip must be replaced with the value in the LCD).
on the bottom of the page, there's a link called "firmware upgrade". Click it.
On the next page, you can select the flash image you want to flash. be sure that it has the ".nfi" extension. You can't flash other images (like .img)!
Click on "FLASH!" and wait. It might take some time to upload and flash the image.
Switch the box off again, and on again. The new image should be flashed and working.
Comment