### How to flash a dm800 via web browser ###
Collapse
This is a sticky topic.
X
X
-
No, you dont need the null modem just type the ip address you get from the box in your browser.Leave a comment:
-
when using a browser to flash the box do you have to use a null modem cable as well or just ethernet to router?Leave a comment:
-
CA error
I thing yours is clone and you are trying to flash with orginal image. Now you have to flash again with approprate bootloder and flash the right image for the clone DM
Leave a comment:
-
And also i press and hold the on/off button on the box and switch on the box but it show the same error " EER01 No CA Found".Any ideal what's wrong to the box ?Leave a comment:
-
Hi, recently i update new software for dm800c-hd ,after finish i can't boot up my set , it show err01 : No CA found" on the oled display,i use dreamup to flash back my old image but same result ,i try dreamup patched,web browser,flashwizard whatever matter in the forum still can't solve the problem,can anyone know how to solve this problem,please help me thank you very much.Leave a comment:
-
can i flash image with DCC? when i was trying it browse only for .img that is not suite for dm800hdLeave a comment:
-
I flashed a clone 800 with 1.335 Dreamup, it took around 10mins. I had a null and net cable connected with a wirelesss Laptop.
With a clone you must use a patched Image. The 4.7 Gemini, I used had the information sim201e-75-GP470-dm800-20100209.nfi
sim 2.01 BL 75 Gp470 for a matching clone dm800Last edited by alec; 8 May, 2010, 15:04.Leave a comment:
-
DM 800HD clone.
Please confirm that a clone should use patched images(or factory preloaded Gem 4.5 BL 75 and SIM2,01)
I understand through the forums that an original box must
utilize original programs.
When someone says he wants to flash his box, this action will
result to the update of the various promas inside the box.
Thanks for your reply,
Cheers
Leave a comment:
-
Try "Flashwizard" will do it for you.Attached FilesLeave a comment:
-
i ave been looking at the dreambox DM800 isnt there any eaiser guide to flash it then the one above?
advice would be gratefull.
kas09Leave a comment:
-
Leave a comment: