### How to flash a dm800 via web browser ###

Collapse
This is a sticky topic.
X
X
 
  • Time
  • Show
Clear All
new posts

  • westhamdaz
    replied
    Originally posted by Bulld0g
    No, you dont need the null modem just type the ip address you get from the box in your browser.
    thanks for the quick reply fella

    Leave a comment:


  • Bulld0g
    replied
    No, you dont need the null modem just type the ip address you get from the box in your browser.

    Leave a comment:


  • westhamdaz
    replied
    when using a browser to flash the box do you have to use a null modem cable as well or just ethernet to router?

    Leave a comment:


  • crnair
    replied
    CA error

    Originally posted by nabets
    And also i press and hold the on/off button on the box and switch on the box but it show the same error " EER01 No CA Found".Any ideal what's wrong to the box ?
    I thing yours is clone and you are trying to flash with orginal image. Now you have to flash again with approprate bootloder and flash the right image for the clone DM

    Leave a comment:


  • nabets
    replied
    And also i press and hold the on/off button on the box and switch on the box but it show the same error " EER01 No CA Found".Any ideal what's wrong to the box ?

    Leave a comment:


  • nabets
    replied
    Hi, recently i update new software for dm800c-hd ,after finish i can't boot up my set , it show err01 : No CA found" on the oled display,i use dreamup to flash back my old image but same result ,i try dreamup patched,web browser,flashwizard whatever matter in the forum still can't solve the problem,can anyone know how to solve this problem,please help me thank you very much.

    Leave a comment:


  • tobyva
    replied
    can i flash image with DCC? when i was trying it browse only for .img that is not suite for dm800hd

    Leave a comment:


  • wayne19
    replied
    hi can l do the same on dm500

    Leave a comment:


  • alec
    replied
    I flashed a clone 800 with 1.335 Dreamup, it took around 10mins. I had a null and net cable connected with a wirelesss Laptop.

    With a clone you must use a patched Image. The 4.7 Gemini, I used had the information sim201e-75-GP470-dm800-20100209.nfi

    sim 2.01 BL 75 Gp470 for a matching clone dm800
    Last edited by alec; 8 May, 2010, 15:04.

    Leave a comment:


  • kadnor
    replied
    DM 800HD clone.

    Please confirm that a clone should use patched images(or factory preloaded Gem 4.5 BL 75 and SIM2,01)
    I understand through the forums that an original box must
    utilize original programs.

    When someone says he wants to flash his box, this action will
    result to the update of the various promas inside the box.

    Thanks for your reply,
    Cheers











    Originally posted by Bulld0g
    You can but it takes an hoour as opposed to a couple of mins with your browser.

    Leave a comment:


  • node
    replied
    Originally posted by kas09
    i ave been looking at the dreambox DM800 isnt there any eaiser guide to flash it then the one above?
    advice would be gratefull.
    kas09
    Try "Flashwizard" will do it for you.
    Attached Files

    Leave a comment:


  • kas09
    replied
    i ave been looking at the dreambox DM800 isnt there any eaiser guide to flash it then the one above?
    advice would be gratefull.
    kas09

    Leave a comment:


  • Bulld0g
    replied
    Originally posted by BIGSTAR09
    Can I flash my DM800 HD with Dream up ??????????
    You can but it takes an hoour as opposed to a couple of mins with your browser.

    Leave a comment:


  • BIGSTAR09
    replied
    Can I flash my DM800 HD with Dream up ??????????

    Leave a comment:


  • abeltcb
    replied
    backup

    how to do a backup of image from the box?
    thks

    Leave a comment:

Working...