If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
I know im bringing up a old post but thank's for the tut
also this does not work for me i have to move the dish on my own and find all the sats i need to i cannot get 1w thor for the life of me i can only get 28.2e / 19.2e / 13.2e / on which 19.2 the signal is crap. but 28.2 is 100% why is this?
I know im bringing up a old post but thank's for the tut
also this does not work for me i have to move the dish on my own and find all the sats i need to i cannot get 1w thor for the life of me i can only get 28.2e / 19.2e / 13.2e / on which 19.2 the signal is crap. but 28.2 is 100% why is this?
cheers
Location,size of dish and you may be just off the arc.
Good on some sats and not on others.
If you cant get a lock on a certain sat try and tune into a channel that has a strong transponder that might do the trick and when you're on it you should be able to view other channels from that sat.
Location,size of dish and you may be just off the arc.
Good on some sats and not on others.
If you cant get a lock on a certain sat try and tune into a channel that has a strong transponder that might do the trick and when you're on it you should be able to view other channels from that sat.
Thank's andy ive got my dish pointing on the front of the house its probs in the same place and my next door neighbour now i think the high winds have moved my dish a bit but untill these winds stop i cant get up there
i can get a little signal from 13.2e about 37% but no good as the channels do not show.
I guess ill have to get my ladders out when its not so windy
My time is showing 18:31 when the time is 16:49.Time zone is London etc.Can anyone suggest how I get the time correct ? Also after following advice and settings suggested on this site,it still won't move the dish! I can move dish with the buttons on the motorso I know the power is there.
My time is showing 18:31 when the time is 16:49.Time zone is London etc.Can anyone suggest how I get the time correct ? Also after following advice and settings suggested on this site,it still won't move the dish! I can move dish with the buttons on the motor so I know the power is there.
Just installed the above system ( hotbird 13, astra 19, astra 28). When using with motorised system , dreambox will boot up when selecting some channels. No problem with fixed dish on Astra ( previous installation).
Used usuals to set it up.
image OpenLi,
Alsat dark motor,
using 119w 129w & 110w with a Invacom Quad Polar. I am now wired direct to the invacom, on bird (Verify with a i-link receiver) but can get no Signal or lock..
Where to look???????
(edit) Got a few locks on F3 so muct be my sat xml file?
Thanks
Comment