newnigma2-dm800hd-v3-3-1-ramiMAHER #ssl84a

[andiewill]

Code:

* driver: 09.11.2011 patched ramiMAHER
* secondstage: 84a sim2
* kernel: 2.6.18
* Enigma2 3.2.1: 10.11.2011 patched ramiMAHER
* Enigma2 Plugins: 14.11.2011
* Newnigma2 Plugins: 14.11.2011


Blindscan not Works

Must activate the Harddisk The Flash Internal

menu -> setup -> system -> harddisk):
HarddiskDriveSelection - HarddiskDriveSetup - HarddiskMountpointBrowser


Blindscan not Works Must activate the Harddisk The Flash Internal menu -> setup -> system -> harddisk): HarddiskDriveSelection - HarddiskDriveSetup - HarddiskMountpointBrowser.






newnigma2-dm800hd-v3-3-1-ramiMAHER #ssl84a

or


newnigma2-dm800hd-v3-3-1-ramiMAHER #ssl84a

[noopets]

Will this work on a 2.10 sim box with 82 bootloader?

Just got my box today so need advice on which image to use!

Cheers

[andiewill]

If it is an 800 se this will not work ........

[noopets]

Hi mate it's a 800HD - so is this ok to use?

[andiewill]

This image is for 800 clone sim 201, i thought sim 210 was what came with the new db800se ?

[noopets]

I haven't looked at it yet. But when I ordered it the spec was

Boot82, gemi5.1, sim 2.10 fan on heat sink, tuner M alps

?

[lincsat]

You can use the SIM 2.10 on the DM800 and DM800SE.

[billo75]

newnigma2-dm800hd-v3-3-1-ramiMAHER EPG

Can anyone let me know how to get the EPG going on this image, Ive got everything else going but cant set the EPG up

Billo

[andiewill]

You need to ftp the tspanle to your box and download Crossepg and then configure the settings in cross epg and off you go.

[billo75]

You need to ftp the tspanle to your box and download Crossepg and then configure the settings in cross epg and off you go.

Cheers Andiewill,

Ive done that,all up and running now
Cheers again

Billo

[mirek3814]

error1: no ca found

After upgrading firmware i'm received following error;
error1: no ca found - DM 800 original, what happends? No ip at the moment, how fix the problem?

[andiewill]

After upgrading firmware i'm received following error;
error1: no ca found - DM 800 original, what happends? No ip at the moment, how fix the problem?

You must of used the wrong image for your box but here you go below.......

no ca error fix

[Punx]

You must of used the wrong image for your box but here you go below.......

no ca error fix

dont forget u need a RS232 cable

[hbm007]

thanks

Code:

* driver: 09.11.2011 patched ramiMAHER
* secondstage: 84a sim2
* kernel: 2.6.18
* Enigma2 3.2.1: 10.11.2011 patched ramiMAHER
* Enigma2 Plugins: 14.11.2011
* Newnigma2 Plugins: 14.11.2011

Blindscan not Works

Must activate the Harddisk The Flash Internal

menu -> setup -> system -> harddisk):
HarddiskDriveSelection - HarddiskDriveSetup - HarddiskMountpointBrowser

Blindscan not Works Must activate the Harddisk The Flash Internal menu -> setup -> system -> harddisk): HarddiskDriveSelection - HarddiskDriveSetup - HarddiskMountpointBrowser.

newnigma2-dm800hd-v3-3-1-ramiMAHER #ssl84a

or

newnigma2-dm800hd-v3-3-1-ramiMAHER #ssl84a

[/QUOTE]

[brsdbrsd]

Will this work on a 2.10 sim box with 82 bootloader?

Just got my box today so need advice on which image to use!

Cheers

i dont know about this try to explain i know iam a ignorant sory for this