NEW *** OpenPLi-2.1-beta-dm800hd pvr 2.01 2.10 ssl84b 2013-08-20-By-cobra1423-Backup

[cobra1423]

hi people small bug fix for ondemand when ondemad starts up and you try the menu button on remote It dose not do anything.
its suppose to let you into setup menu where you can setup the way you would like it ie, set to HD streaming. Now to fix this download the attached file and add it into the ondemand plugin folder to do this.
start up DCC on left at bottom you will see usb->media/usb click on that this will take you into your usb drive in there go into , cobra-extensions-usb,enigma2,python,Plugins,Extensions,OnDemand. now in there we will see files transfer over the new ui.py file it will ask if you would like to overwrite file click yes now just restart enigma job done now try ondemand press menu button and it should let you into setup. please let me know if this fix works ok thanks.
file download here ---> http://www.mediafire.com/download/mb...vj9rp4a/ui.zip
ps, remember to unzip the file first.

[andiewill]

Been trying to get the autobouquet to populate or change region and i get this below permission denied , this plugin works great in your last image with no problem any ideas what this means ? i have the box running with a 64gb usb pen drive but no hard drive could that be the issue ?

screenshot.jpg

[cobra1423]

hi start up DCC go into
usb->media/usb click on that this will take you into your usb drive in there go into , cobra-extensions-usb,enigma2,python,Plugins,Extensions,AutoBouquets highlight all files in there and right click and change all attributes to 755 then try plugin again.

[andiewill]

hi start up DCC go into
usb->media/usb click on that this will take you into your usb drive in there go into , cobra-extensions-usb,enigma2,python,Plugins,Extensions,AutoBouquets highlight all files in there and right click and change all attributes to 755 then try plugin again.

Worked a treat and nice one .......... gonna keep on testing but one thing that i noticed is that when i try and merge the my motor bouquet to your bouquet, your disappears and it will only come back when i press the blue button and select autobouquet download but when i do this your adult streaming, radio bouquet and below that disappears, i will continue to test to see if i can solve this issue, but as stated previously great image despite my little blips.......

[cobra1423]

Ok can you please upload your enigma2 folder from etc folder I will look at your setup m8 just use DCC and transfer it over to your computer then upload file and pm it to me. I will sort it and send it back to you then just transfer it back to box.

[andiewill]

The box was playing up a little with bouquets disappearing etc so I have started from fresh and reflashed the image, followed your previous instructions regarding Attributes and OnDemand first then loaded my bouquets onto the box then i set the region in autobouquets and all is working fine after a restart, it took a while to work out and set up but it is there now all working.

One thing i noticed again when you set the autobouquet region and let it do its thing the adult streaming, radio and below generated by autobouquet disappears as stated previously .... no where to be seen in the list ? PM sent.....

Thanks very much cobra1423 for taking the time out to help me out........

[cobra1423]

No problem Ok I will look into it in the morning I'm not at home right now just using my iphone to answer questions .

[cobra1423]

Why not download the new image it's even better

[ramhir]

Hi, Will the latest image work with clones? I downloaded it last night and flashed my dm800 clones and it hang on the loading enigma screen. I left it on this screen for 20 mins hoping it would load but nothing

[andiewill]

Did you read the read me instructions to set it up correctly ? you will need a USB device plugged into your box for this image to work, or download the image on the first page which will work without USB but you won't get all the extras.

[ramhir]

Yes, I did follow the read me instructions. Maybe, it was to do with the way I formatted the USB device, which I prepared on a Linux machine rather than on a Windows machine. Will give this any try tonight, but this time, will use a Windows machine to prepare the USB device.

[andiewill]

Yes ... I think that it has to be done on a windows machine for it to be formatted into a readable ext 3 which linux does not do as far as i am aware ? maybe with a third party software, but for ease of use I would use the windows to format the USB drive etc .... as all the software needed is in the download link supplied by cobra1423, and once the USB is prepared flashed your box and it will read from the USB to load all appropriate files and enjoy ....... I hope that helps.

[thompso24]

hi all! im having problem loading step 2,exd2 its saying requries elevation code 740
any ideas
regards neil

[cobra1423]

hi thompos24
right click on Ext2 Volume Manager and run as administrator that will do the trick.

[ramhir]

Finally up and running with this iamge.
andiewill, thanks for all your help mate. It would seem that you have to use the windows tools to format and transfer to files to the USB rather then Linux. Will test it for a few days to see how it compares to my current image (DreamElite Blackhole 1.33d v3). Initial thoughts are - looks good