If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Im setting my dish up. Im using pli jade on dm500. have the dish lined up for 28 east astra.
i have a snr of 63 agc 100 ber 0.
i cant get any channel workin help!
an snr of 63 is very low and so thats probably why you have no channels ,i would say your dish is not properly alligned . you would ideally want atleast an snr in the 90s so you will need to tweek your dish a little to raise the snr level .
Comment