LNB switch

[domirudi]

Hi .
I changed the dish using now a 1m dish with three LNB for hotbird 13 E eutelsat 16E and ASTRA 19.2E.
I am using a switch with four exit plus one for TV.So I can use four LNB.I have connect ASTRA 19.2 with LNB1 HOtbird 13 E with LNb 3 and eutelsat 16 E WITH LNB 2ta this switch.I can see only hotbird satellite.I am using db 500s with gemini 4.2.At sat configuration i put hotbird at diseqc BA.ASTRA at AA and hotbird at AB. I can see only hotbird.Why cant i see other satellites?

[reddevil157]

Are you saving each sat after configuring it, ie. 19.2 LNB1 AA and save, then onto the next one. This is what I had to do with dreamelite (pheonix) edition.

[domirudi]

problem is in configuring db.lnb 1 at switch is DISEqC AA or not.Lnb2 at switch is DISeqC AB or not,lnb 3 at switch is DISEqC BA or not?tis is my problem.

[reddevil157]

This is how I set mine up...except I had diseqc set to 1.1. This expands the options a little more but I left everthing else as default. Have seen some set up Uncommitted but from what I understand this is for cascading switches. No one seems to just say " this is how to set up a diseqc switch". I think whatever works, is the right way