Signal issue

[hitman07]

At the weekend i switched on my syatem to find that no channels at all were working (Including FTA).
The signal was stuck at around 42 also
I rebooted several times to no avail then i took out the LMB cable to the back of the box and reinserted again and it worked a few moments later. However this has just happened again and im at a loss as to what the reason is behind it. If anyone can shed any light on this id be really grateful

[mdt]

At the weekend i switched on my syatem to find that no channels at all were working (Including FTA).
The signal was stuck at around 42 also
I rebooted several times to no avail then i took out the LMB cable to the back of the box and reinserted again and it worked a few moments later. However this has just happened again and im at a loss as to what the reason is behind it. If anyone can shed any light on this id be really grateful

check your cables/connections in case of a short and you could do a reflash but back up your settings first. regards mdt

[tony2803]

At the weekend i switched on my syatem to find that no channels at all were working (Including FTA).
The signal was stuck at around 42 also
I rebooted several times to no avail then i took out the LMB cable to the back of the box and reinserted again and it worked a few moments later. However this has just happened again and im at a loss as to what the reason is behind it. If anyone can shed any light on this id be really grateful

take the box to a friends house who has dish,if it works fine there it could be your cable feed or lnb..