Dreambox setup problems

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • keto
    Newbie
    • Jan 2011
    • 15

    #1

    Dreambox setup problems

    Hi guys - hope someone can help me, I bought a DM500s just over 12 months ago with a free xmas gift - gift stopped after 1 month and I tried to run it on my motorised dish. No luck - put it away until recently. Problem is when I do a channel scan it only picks up BslyB channels on every satellite - I have done a factory reset and scanned thor, gets ALL the channels. Go to 28.2 and scan, download these channels. Now go back to 1.0 deg (thor) and channel lists only BslyB no others. Also there is only BslyB on the providers list.This is the same on other satellites as well - can anyone shove me in the right direction please
    cheers
  • andy91
    V.I.P. Member
    • Aug 2010
    • 3583

    #2
    Have you set it up in the motor settings with long and lat?
    Install these bouquets and if you have correct long and lat the dish should drive to the sat and channels.
    Use dreambox edit to put the bouquets on.



    How to convert enigma 2 bouquets to enigma 1 (and vice versa)
    If you have an enigma 1,2 bouquet and would convert it to the other open up dreamboxedit and load your bouquet.

    When its loaded click on tools and select - toggle between versions 2,3 & 4 settings until you get the desired settings and then upload to your box.


    Andy.
    Last edited by andy91; 28 August, 2011, 21:51.
    New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

    Comment

    • keto
      Newbie
      • Jan 2011
      • 15

      #3
      cheers andy I'll give this a go tomorrow and post back the results

      Comment

      • keto
        Newbie
        • Jan 2011
        • 15

        #4
        just a quick thought - how do i find the lat and long

        Comment

        • andy91
          V.I.P. Member
          • Aug 2010
          • 3583

          #5
          Originally posted by keto
          just a quick thought - how do i find the lat and long
          Put your full address in the link below.
          You dont put it in exactly how it reads so if you stuggle pm your details,

          Andy,

          Satellite Finder / Dish Pointing Calculator with Google Maps | DishPointer.com
          New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

          Comment

          • Rodbouy
            DK Veteran
            • Jul 2010
            • 1320

            #6
            I wouldnt use lat long with a 500s. Its not the best.

            Comment

            • keto
              Newbie
              • Jan 2011
              • 15

              #7
              Hi Rodbouy - what then?

              Comment

              • Rodbouy
                DK Veteran
                • Jul 2010
                • 1320

                #8
                Just manually set it, un tick goto, then pick your sat from the drop down and move east or west.

                Store sat and move to the next.

                Comment

                • keto
                  Newbie
                  • Jan 2011
                  • 15

                  #9
                  did that originally and stored 1deg West to 28.2 East - if I do a channel download from 1 deg W (thor) I get all the channels (premier etc) as soon as I dowlaod from 28.2 (Astra) I loose all the other channels on all the satellites excepy BSkyB - provider only shows BSkyB on all sats

                  any advice would be appreciated

                  many thanks

                  Comment

                  • Rodbouy
                    DK Veteran
                    • Jul 2010
                    • 1320

                    #10
                    what do you mean download ?

                    Download individual lists per sat ?

                    Comment

                    • keto
                      Newbie
                      • Jan 2011
                      • 15

                      #11
                      Yes - is that wrong ? - I only ask because I also have a Technomate 5400 + super and I can get all the sat channels on every satellite - is this not the case with a DM ?

                      again many thanks to all - still trying
                      cheers

                      Comment

                      • Rodbouy
                        DK Veteran
                        • Jul 2010
                        • 1320

                        #12
                        No you download 1 list with a multi sat setup.

                        Not individual as it will overwrite the old bouquet.

                        Comment

                        • keto
                          Newbie
                          • Jan 2011
                          • 15

                          #13
                          that sounds exactly what I have done - could you please give me more info on the download
                          many thanks

                          Comment

                          • Rodbouy
                            DK Veteran
                            • Jul 2010
                            • 1320

                            #14
                            Why dont you do a multi sat scan, then once you have done that, use dreambox edit to create your own bouquets.

                            Comment

                            • andy91
                              V.I.P. Member
                              • Aug 2010
                              • 3583

                              #15


                              Try these bouquets they have alot of multi sats,

                              Andy.
                              New Members http://www.digital-kaos.co.uk/fo rums/f5/forum-rules-2/ A Good Place To Start

                              Comment

                              Working...