TWO DREAMBOXES ONE VIRGIN SUPERHUB

[whyzer]

Hi guys,
can u please help i have a similar problem to chazkelly1985!!

I have got 2 dream boxes! a 500hd & a 600pvr
both have their own c-lines, their own Ethernet cables
BUT THEY ARE RUNNING OFF THE VIRGIN SUPER HUB
but i can only watch one at a time??

PLEASE HELP

[ramjet]

just plug them both in and assign each one its own ip , hpw hard can it be ?

if you have problems on the lan , just use a lan switch to give you more ethernet sockets

and make sure each c line is unique , no using one c line twice

and no need to make several posts on the same subject either

[whyzer]

IVE TRIED THAT
THEY HAVE DIFFERENT IP ADDRESSES?
DIDNT WORK

[whyzer]

i have two different c-lines

[Rodbouy]

When both are plugged in even tho one does not clear are you able to download a plugin.

Try and see

[whyzer]

which plugins?

[Rodbouy]

any, just try down load cccam info from the plugin menu of the box as a test both boxes while they are both attached to router

[whyzer]

plugins work

[whyzer]

these are the mac address & ip addresses

mac addy 192.168.0.4 dm600 original
mac addy 192.168.0.5 dm500hd clone

two c-lines two different suppliers

please help thanks

[Rodbouy]

If plugins download ok then it should be clearing ok as its got a internet connection.

See when you unplug the one the works, does the other one clear right away

[TheCoder]

IVE TRIED THAT
THEY HAVE DIFFERENT IP ADDRESSES?
DIDNT WORK

Your not trying to do something silly like run two boxes from a single sat feed using a splitter are you ?

[nathan2007]

sounds like there both using the same ip to me
mate

[Mr S]

Assign a completely different IP to the second one.

E.g. 192.168.0.4 change to 192.168.2.5

(Also make sure that your C line is entered in corrently)

[TheCoder]

Assign a completely different IP to the second one.

E.g. 192.168.0.4 change to 192.168.2.5

(Also make sure that your C line is entered in corrently)

The IP's both need to be on the same subnet as the router or it definately wont work properly. Generally, routers are set up to allow 254 other devices on the same subnet so only the last digit group is allowed to change (1-254)

[nathan2007]

yeah but were talking about the unsuperhub here mate its a real crock of s....... i use mine in router only mode as i couldnt get my box working at all just kept trying to connect, changed back to router only used my old netgear an first time everything was back to being gr8


until a firmware upate i aint using mine in modem mode