pink screen/powering off

[irishtoon]

hi guys i have two dm 500s here flashed them both tonight(i have flashed other boxs at least 20 times before) but since i flashed these two i cannot get them to work, on one i go through the start up settings as far as the tuner setting i select my dish type and select auto tune and bank the screen goes pink with lines through it and the power light on the dm500s goes off on the other i have got as far as searching all the channels but when i select one i get the same pink screen and box power going its hardly the tuner on both box's? as these two boxs are new well no more that 3 months old and very little use,
any help would be great
thanks

[mtv1]

hi guys i have two dm 500s here flashed them both tonight(i have flashed other boxs at least 20 times before) but since i flashed these two i cannot get them to work, on one i go through the start up settings as far as the tuner setting i select my dish type and select auto tune and bank the screen goes pink with lines through it and the power light on the dm500s goes off on the other i have got as far as searching all the channels but when i select one i get the same pink screen and box power going its hardly the tuner on both box's? as these two boxs are new well no more that 3 months old and very little use,
any help would be great
thanks

you tried a different image the one your using might be corrupt also are u using the same scart to setup both always the small things

[irishtoon]

yea i changed my image really need to change from gemini always seem to have problems with them ill try the scart now ment to do it a while ago but that would hardly cause teh dreambox to switch off would it? thanks for the reply


tried the scart didnt help same thing

[mtv1]

yea i changed my image really need to change from gemini always seem to have problems with them ill try the scart now ment to do it a while ago but that would hardly cause teh dreambox to switch off would it? thanks for the reply


tried the scart didnt help same thing

ya gemini to my knowledge is unsupported try pli jade i have some easy images if you need them

[mast]

Hi

Are you using the same psu on both while you are flashing and setting up, if you are then try different psu.

Regards

[mtv1]

Hi

Are you using the same psu on both while you are flashing and setting up, if you are then try different psu.

Regards

psu {power supply unit } to my knowledge if faulty will not allow flashing believe me i know most likely a bad flash and he has flashed before

[mast]

psu {power supply unit } to my knowledge if faulty will not allow flashing believe me i know most likely a bad flash and he has flashed before

Hi mtv

I have flashed before with faulty psu (think it might be dependant on what sort of voltages its dishing out when faulty) and then would stick on setup stage or just the pli screen and wired colors as well.

From my experience I would say thats a classic psu fault but not dismissing what you are saying cos it could quite easily be a corrupt image/bad flash so maybe download an image from a different source and try again.

Regards

[irishtoon]

hey lads thanks for the help i two faulty new psu's not good anyway boxes are working thats the main thing

[mast]

Hi

So are you saying both the psu were faulty and now with new psu boxes are running fine, just so its clear for other people who experience similar problems.

Regards