Just joined need help with dm500s

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • andrewrich
    Newbie
    • Oct 2012
    • 7

    #1

    Just joined need help with dm500s

    Hello all
    I have just got my new dm500s in the post and i have flashed it with the latest pli image 500 maxvar and installed cccam 3.0 and also the cccam.cfg all went well.

    So i then started to do a auto scan on transponders and sat all was looking good as i could see the services and sats getting found.

    but here is the problem after the scans where finished i have no picture or audio on any of the channels. All i get is a black screen the box shows what channel I am on but it will not show the channel.

    If some one could be so kind to help me as i am at a loss at the momment and dont know where to go from here.

    Thanks
    A.R
  • dixie74
    Top Poster +
    • Feb 2011
    • 222

    #2
    do you get the freeview channels?try a diffrent cccam did you ftp cccan.cfg file to ect folder.

    Comment

    • mdt
      V.I.P. Member
      • Feb 2009
      • 3034

      #3
      have you set up the network? make sure you dont have an ip clash,regards mdt
      DM800HDSE SIM 2.10. SSL84D OPEN-ATV ORBITAL 80CM/DARK MOTOR/IBU/53E-30W

      Comment

      • andrewrich
        Newbie
        • Oct 2012
        • 7

        #4
        Originally posted by dixie74
        do you get the freeview channels?try a diffrent cccam did you ftp cccan.cfg file to ect folder.
        no i am not getting any picture on any channel but the box has found all the channels.
        i did not ftp the cccam.cfg to the box i just installed it through
        the plugins section on the dm500s

        what cccam would you suggest to try?
        and do i need to edit the cccam.cfg to view free-view channels?

        Comment

        • andrewrich
          Newbie
          • Oct 2012
          • 7

          #5
          Originally posted by mdt
          have you set up the network? make sure you dont have an ip clash,regards mdt
          the network is set up ok and only has one ip signed to it

          could i have tuned it wrong?

          will check back in the morning giving up until tomorrow now

          Comment

          • dixie74
            Top Poster +
            • Feb 2011
            • 222

            #6
            no to view freeview channels you dont you dont need to edit.to be honest the cccam your using should be fine dont know why i mentioned it.check the signal is ok.but it should be ok as when you scanned it found the channels.

            Comment

            • smoggie
              DK Veteran
              • Jul 2008
              • 863

              #7
              check your scart lead or try the rgb lead. you dont need cccam to view the free channels

              Comment

              • chic.
                V.I.P. Member
                • Feb 2009
                • 1599

                #8
                hi m8 reflash with this Digital Kaos - Downloads - plijade3 dm500 then put this channel list on using dreambox edit http://www.digital-kaos.co.uk/forums...1-12.10.12.rar
                if i helped hit the thanks btn

                Comment

                • andrewrich
                  Newbie
                  • Oct 2012
                  • 7

                  #9
                  Originally posted by chic.
                  hi m8 reflash with this Digital Kaos - Downloads - plijade3 dm500 then put this channel list on using dreambox edit http://www.digital-kaos.co.uk/forums...1-12.10.12.rar
                  cheers for the help that seems to have done the trick.
                  now all i have to do is find a good chardshare site would any of you be able to point me in the right direction

                  thanks again

                  Comment

                  • gmb45
                    Admin Assistant
                    • Nov 2008
                    • 7538

                    #10
                    Originally posted by andrewrich
                    cheers for the help that seems to have done the trick.
                    now all i have to do is find a good chardshare site would any of you be able to point me in the right direction

                    thanks again
                    noooooooooooooooooooooooo !!!
                    Last edited by gmb45; 26 October, 2012, 13:22.
                    support mountain resue

                    support digital-kaos here


                    forum rules

                    no keygens or torrents to be posted no autodata discussions

                    pish pt walkers


                    Comment

                    • andrewrich
                      Newbie
                      • Oct 2012
                      • 7

                      #11
                      Originally posted by gmb45
                      noooooooooooooooooooooooo !!!
                      just seen your sig message will press the button from now on

                      Comment

                      Working...