DM500S permenantly on standby!

[portbhoy]

Try that I think it may just be the control board for the PIR thats faulty or the PIR has slipped down out of range of the remote!

[icewater]

Guys you are all stars,

I have it up and running with pli.img, however i can't control the box using the remote control?

The remote is definitely working, i checked the led by looking through my mobile, so i have to control it using the remote on the web interface.

Think portbhoy might be right re the PIR, is there anywhere that i can get a replacement?

Thanks again for all your help so far

Regards

[portbhoy]

Google it you'll find one I'm sure it's an easy fix, you may try and open the box and see if the sensor has dropped down from it's little window may be as simple as that!

[portbhoy]

Oh and for the record if it's connected via a router you can control it by using the web interface just type the boxes IP into your browser

[icewater]

Thanks portbhoy, will search google see if i can find one.
I've had the cover off all this time and everything looks in place, but will have a closer look.

I'm just trying to set it up now using the web interface its just a weeeeeee bit slow

Thanks everyone for your help much appreciated.

Icewater