Help 600PVR image

[nelgo]

My dreambox DM 600 PVR was going crazy so I took a back up of all the files using telnet / ftp and ended up with a .img file on my Hard disk.


downloaded Universal DreamUP V1.3.3.11


downloaded an image file
dreambox-image-dm600pvr-20120108020416.nfi


Connected my DM600 using a null modem and Flashed the image



When all was ready, I switched off, waited a minute, and switched on the DM600 but I got the Red and Green light on but no signal.


How can I restore my .img file cos the DreamUP software does not give me that option??
many tks
Nelgo

[psats]

have a read of this.

http://www.digital-kaos.co.uk/forums/f215/how-guide-flashing-dreambox-dm500s-dm600-less-than-2-mins-224293/

[nelgo]

many tks,
the only problem is that when I attach it to the TV, it says no signal, and I cannot communicate with the box from my pc through network. I can only communicate through Serial port at the moment !!

[psats]

many tks,
the only problem is that when I attach it to the TV, it says no signal, and I cannot communicate with the box from my pc through network. I can only communicate through Serial port at the moment !!

as in the other link power off hold the power button then power on
after few secs let go you should now be able to see box via web page.
looking at your dreamup pic try. 192.168.1.103

[nelgo]

many tks for your reply. unfortunately nothing happens. when I hold the power button and power on, the red goes on, the green flashes once then it lights on and nothing else happens!!!

as in the other link power off hold the power button then power on
after few secs let go you should now be able to see box via web page.
looking at your dreamup pic try. 192.168.1.103

[psats]

many tks for your reply. unfortunately nothing happens. when I hold the power button and power on, the red goes on, the green flashes once then it lights on and nothing else happens!!!

you get red then green flashing constant means you can log in to box via web page
did you try putting in the ip in web page. ? ?
the box still needs to be connected via lan

[foxy6800]

if you are getting a solid red & green light and nothing is happening (Black screen on TV and no IP address once connected to router via LAN), your box is a clone and you need to used Dreamup and "pli-jade3-dm600pvr-20090627-6494.nfi" to flash it.
Have you tried to extract the image file (your backup ) to see of you get a nfi file to use and flash with that.

[nelgo]

many tks for your reply. Dont think it is a clone. It should be an original box !!

Will try to find the image you told me about and will try to extract the .img file.

many thanks again
nelgo

if you are getting a solid red & green light and nothing is happening (Black screen on TV and no IP address once connected to router via LAN), your box is a clone and you need to used Dreamup and "pli-jade3-dm600pvr-20090627-6494.nfi" to flash it.
Have you tried to extract the image file (your backup ) to see of you get a nfi file to use and flash with that.