Guide: Flashing a Dreambox with Dreamup

[mHumle]

Yes :-) Thanks. Just found a working version 1.3.3.2.
Also I had to have the network connected. Thought it was an option.
Good forum - THANKS GUYS!!
Almost went NUTS over this ;-)

[ermanu]

Having problem with dreamup

Hello,
My dreambox is dead.
I want to flash with dreamup.
No problem with connection.
I click on connect then power on the DM
Dreamup uploads the flash but stays at upload completed, waiting for acknowledge.
Changing cable or dreamup version didn't change the result.
What can I do?
Thank you

[Nibor]

Hello,
My dreambox is dead.
I want to flash with dreamup.
No problem with connection.
I click on connect then power on the DM
Dreamup uploads the flash but stays at upload completed, waiting for acknowledge.
Changing cable or dreamup version didn't change the result.
What can I do?
Thank you

Just restart the DB and everything should be ok....

[aahmed69]

DM600PVR

I have the same problem on DM600, it just sits there waiting for an acknowledgement. Restarting it does not solve the problem.

[Nibor]

I have the same problem on DM600, it just sits there waiting for an acknowledgement. Restarting it does not solve the problem.

try to flash again... with latest dreamup....
if that doesnt work, try a older version of dreamup...

[M0usey]

Required

• Null Modem Cable (this is NOT the same as a serial or rs232 cable, although it looks the same)
  
• Image File (.img)
• DreamUp Program
  

Hi,
Please can someone explain to me what is an 'image file' and where I can get/download this? Thank you very much

[dreamon500]

Is there any solution for timebomb?

Is anyone out there with a solution for the timebomb with ver. 4.3.1 and above. I?m having problems with my dm500S.

Thanks anyone for replying!

[Nibor]

Required

• Null Modem Cable (this is NOT the same as a serial or rs232 cable, although it looks the same)
  
• Image File (.img)
• DreamUp Program
  

Hi,
Please can someone explain to me what is an 'image file' and where I can get/download this? Thank you very much

The image file is the "operating system" that you need to use the box, like windows on a pc.
As on pc`s there are many different, and you need to try different to find out what you like.
But basically, everyone does the same, but with different skins/look.

You also need to download and install cam`s, this is a small "programm" that you need to read cards etc...

Hope this was helpful

[ashraf810]

reading of the posts and reply is of great help,thannks for all

[arva]

I use dream up 1.3.3.4 to flash 3 dm600.
The first 2 flashed normally but the third when I connect the power the program recognize the dm600 but nothing else happening...

[ypt]

ive done this today!
thanks!

[opahein]

Hein opa

Wher can i download dreamup older version ?latest version 1.3.3.5 is not working correct

[jiji2010]

my dream box reciver is blocked no channels shown, what can I do to see all channels, OSN, Sky channels...etc....

[deviljr]

help, im getting upload error when i try to flash using dreamup.

[nabets]

I use dreamup, dreamup patch and web browser to flash it successfully but still the same can't boot up ,the oled display show " ERR01 No CA Found",i suspect is the sim card , because after i update the new software thru internet then this thing happen,is there any other way to recover the receiver , please help me thank you.