I am trying to to use a multi stationery satellite setup using a 4 way diseqc switch, only two of the four input are being used (input1: Astra1 19e - input2: Astra2 28.2e) but i cannot get it to work with the 500s, with a technomate it worked straight away but i can get it to work on the 500s. In satellite configuration i have changed to 4 satellites using diseqc switch and changed astra1 to lnb1 and astra2 to lnb2 but i still get no signal. Any Help will be much appreciated.!
-
Read the Rules here; they apply to Everyone.
___________________
In the good old days, I hadDM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Maxx 110cm Dish
Technomate 2300 Motors
sigpic -
Fixed now, needed reboot.
Read the Rules here; they apply to Everyone.
___________________
In the good old days, I hadDM800s HDOpenbox S10
TM500
DM500s
90cm FortecStar dish
Maxx 110cm Dish
Technomate 2300 Motors
sigpic
Comment